|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Ratings on Ls, voltages posted by drlowmu on March 13, 2007 at 06:51:25:
It's not the DC voltage to ground that concerns me, it's the AC voltage *across* and SC currents through the choke. That's what might lead to saturation of the core.I did a bit of reverse engineering on the Triad unit (not too hard given the dimensions of the core, the inductance and the DCR) and it seems that you might be OK in your application. I wouldn't try to push the DC current up to 600mA though. Keeping the DC current down leaves more headroom for the extra AC flux that the core is subject to in this application.
-- Dave
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Ratings on Ls, voltages - Dave Cigna 13:46:56 03/13/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
