|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Calculating min/max output currents posted by Curly Woods on March 5, 2007 at 14:26:43:
The min and max currents are determined by plotting the load line on the family of plate curves provided by the tube manufacture. Once this is done you fine the points were the load line intersects the plate curves at the maximum grid swing (typically zero bias) and the minimum grid swing. The process requires the calculation of some intermediate data. The easiest way to get started is to obtain a copy of an old tube manual such as the RCA RC-22 or RC-30. I have a scanned copy and will post the pertinent pages on my web page for you in day or two when it gets set up. I will post the URL for it here when it is ready.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Calculating min/max output currents - beermanpete@socal.rr.com 23:30:36 03/05/07 (5)
- Re: Calculating min/max output currents - beermanpete@socal.rr.com 00:34:54 03/06/07 (4)
- Re: Calculating min/max output currents - Curly Woods 05:02:29 03/06/07 (3)
- Re: Calculating min/max output currents - beermanpete@socal.rr.com 21:24:57 03/06/07 (2)
- Thank you far taking the time.... - Curly Woods 16:05:10 03/07/07 (1)
- Re: Thank you far taking the time.... - beermanpete@socal.rr.com 18:53:08 03/07/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
