|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Thanks Ron, check this out. posted by maynardg on March 3, 2007 at 17:30:51:
The voltages out of the transformer are AC = either test lead arrangement should indicate equally same when meter is set for AC Volts. If you have transformer leads correctly identified, then continuity test shows one side open & AC Volts as measured from that side should accordingly be Zero.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Thanks Ron, check this out. - Ron Oehlert 17:54:31 03/03/07 (10)
- Re: Thanks Ron, check this out. - maynardg 18:11:21 03/03/07 (8)
- Black/Green is NOT CT!!! - Ron Oehlert 20:40:17 03/03/07 (7)
- Re: Black/Green is NOT CT!!! - maynardg 21:02:41 03/03/07 (6)
- What referance to AC Ground?? - Ron Oehlert 22:15:28 03/03/07 (5)
- Thanks again for yourkind consideration - maynardg 03:52:04 03/04/07 (4)
- Re: Thanks again for yourkind consideration - Ron Oehlert 21:47:52 03/04/07 (2)
- Re: Thanks again for yourkind consideration - arend-jan 12:13:58 03/04/07 (0)
- IOW there is no Common test lead @ AC Volts* - Ron Oehlert 18:01:22 03/03/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]