Re: Try a 12at7 phono... - john8417

Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

Follow Ups Full Thread

Topic - Phono Preamp Suggestions? - Vint_age 09:16:03 03/01/07 (35)

Jim Hagerman's Octal Cornet--Can't Lose - slowburn 18:11:55 03/03/07 (5)

Re: Jim Hagerman's Octal Cornet--Can't Lose - Vint_age 08:56:04 03/05/07 (4)

RIAA accuracy in Cornet - Jim Hagerman 11:42:27 03/05/07 (3)

Re: RIAA accuracy in Cornet - Vint_age 13:59:04 03/05/07 (1)

You're absolutely right - Jim Hagerman 11:10:34 03/06/07 (0)

He's Right! - slowburn 13:44:46 03/05/07 (0)

Re: Phono Preamp Suggestions? - Stephen R 05:50:30 03/03/07 (2)

Re: Phono Preamp Suggestions? - Vint_age 08:40:04 03/05/07 (1)

Re: Phono Preamp Suggestions? - Stephen R 09:05:26 03/05/07 (0)

Re: Phono Preamp Suggestions? - JimL 20:47:12 03/02/07 (1)

Re: Phono Preamp Suggestions? - Vint_age 08:30:19 03/05/07 (0)

600 ohm LCR all the way! (nt) - JLH 17:04:10 03/02/07 (1)

Re: 600 ohm LCR all the way! (nt) - Vint_age 08:33:08 03/05/07 (0)

Allen Wrightâ€™s highly regarded FVP5A" - Allen Wright 05:44:20 03/02/07 (1)

Re: Allen Wrightâ€™s highly regarded FVP5A" - Vint_age 06:32:12 03/02/07 (0)

Try a 12at7 phono... - john8417 04:14:58 03/02/07 (4)

Where's the schematic? The image is blank. (nt) - Triode_Kingdom 10:25:11 03/02/07 (1)

Re: Where's the schematic? The image is blank. - john8417 05:54:48 03/03/07 (0)

Re: Try a 12at7 phono... - Vint_age 06:17:22 03/02/07 (1)

Re: Try a 12at7 phono... - john8417 05:58:51 03/03/07 (0)

Re: Phono Preamp Suggestions? - danlaudionut 17:10:51 03/01/07 (1)

Re: Phono Preamp Suggestions? - Vint_age 06:13:08 03/02/07 (0)

I use Doc B's Seduction - mhardy6647 15:46:34 03/01/07 (1)

Re: I use Doc B's Seduction - Vint_age 06:07:37 03/02/07 (0)

Re: Phono Preamp Suggestions? - Cpwill 15:45:53 03/01/07 (1)

Re: Phono Preamp Suggestions? - Vint_age 05:57:02 03/02/07 (0)

Personal favorite - grhughes 10:28:34 03/01/07 (8)

Re: Personal favorite - Vint_age 05:49:55 03/02/07 (7)

I had the 6AN4 on hand... - grhughes 06:18:11 03/02/07 (6)

Re: I had the 6AN4 on hand... - Vint_age 06:35:14 03/02/07 (5)

I talked with Steve Bench about the input coupling cap - grhughes 07:38:43 03/02/07 (4)

Here! Check this out by Sheldon on diyaudio forum. - grhughes 14:40:40 03/02/07 (3)

Re: Here! Check this out by Sheldon on diyaudio forum. - Vint_age 08:17:31 03/05/07 (2)

Re: Here! Check this out by Sheldon on diyaudio forum. - ahlgren11@telia.com 12:32:54 03/10/07 (1)

I think the cap just prevents offsets on turn-on........... - grhughes 12:19:39 03/15/07 (0)

Follow Ups

Re: Try a 12at7 phono... - john8417 05:58:51 03/03/07 (0)