Last week I did built a simple preamp with a meshplate 227. As a load I use a Tango NP-126 line output transformer. I am still searching for the best operating point for the 227. So far I tried Ua(+Uk) 185V Ia 4mA and Ua(+Uk) 150V Ia 4mA. With this last option I used a 9V NiMh battery in the cathodelead. The mids and highs are in both cases marvelous, but it lacks bass. I wonder what the best operating point would be for this tube.
Does anyone know what Kurt Strain uses/used for his 27 preamp? Or do you have experience with a good operating point?Thanks for suggestions,
Ronald Koridon,
Amsterdam,
Netherlands.
This post is made possible by the generous support of people like you and our sponsors:
Topic - 27 preamp - Ronald K. 00:46:09 02/25/07 (14)
- "Does anyone know what Kurt Strain uses/used for his 27 preamp?" - kurt s 10:56:01 02/26/07 (3)
- Re: "Does anyone know what Kurt Strain uses/used for his 27 preamp?" - Ronald K. 14:00:07 02/26/07 (2)
- My schematic is now just in my head. - kurt s 15:09:23 02/26/07 (1)
- Re: My schematic is now just in my head. - Ronald K. 16:11:41 02/26/07 (0)
- Re: 27 preamp - Ivan303 09:00:29 02/25/07 (0)
- Re: 27 preamp - Perseo 07:17:05 02/25/07 (6)
- Re: 27 preamp - Ronald K. 09:24:14 02/25/07 (5)
- Re: 27 preamp - passenger 14:22:18 02/26/07 (3)
- Re: 27 preamp - Ronald K. 16:28:15 02/26/07 (2)
- Re: 27 preamp - passenger 14:35:51 02/27/07 (1)
- Re: 27 preamp - Ronald K. 16:22:19 02/27/07 (0)
- Re: 27 preamp - Perseo 13:15:13 02/25/07 (0)
- Re: 27 preamp - Passenger 07:16:09 02/25/07 (0)
- Re: 27 preamp - Chris O 06:19:56 02/25/07 (0)