In Reply to: Voltage and fuse adjustment in Revox B710-II cassette recorder posted by akolegov on June 23, 2017 at 11:45:42:
on the little square display window on top of the voltage selector, it means that the 220V has been selected. To physically adjust the voltage selector you need to insert a screwdriver into the slot found in the center of the voltage selector to turn it either clockwise or anti-clockwise to select the proper voltage from the little square display window on top of the voltage selector.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- If you can see the 220V clearly... - kootenay 23:29:18 06/23/17 (9)
- RE: If you can see the 220V clearly... - akolegov 03:55:19 06/24/17 (8)
- Use the slow blow fuse... - kootenay 10:09:20 06/24/17 (7)
- RE: Use the slow blow fuse... - Bill Way 12:06:25 06/24/17 (6)
- RE: Use the slow blow fuse... - akolegov 00:04:02 06/27/17 (1)
- manuals - Bill Way 07:46:55 06/27/17 (0)
- RE: Use the slow blow fuse... - akolegov 23:33:41 06/26/17 (1)
- Try this site... - kootenay 01:11:44 06/27/17 (0)
- RE: Use the slow blow fuse... - akolegov 23:24:56 06/26/17 (0)
- I know what you mean... - kootenay 12:25:11 06/24/17 (0)