In Reply to: Need help with Teac A-6300 and Sansui SD-7000!! posted by pkonin on August 5, 2006 at 08:58:19:
I have found that over the years the grease they used on the pinch roller assembly mechanism tends to dry out and then it will not move freely. The solenoid cannot overcome the drag of the old grease. If you are handy you can easily disassemble the mechanism, clean and relube, and you will be good as new. Be very careful with disassembly and reassembly, there are small washers and circlips that easily fly off or fall into where they are not supposed to be. Look very carefully as you disassemble.I make this sound far harder than it really is. Go for it!
Best,
otari :-)
My mother-in-law, after seeing the Levinson 33H amps in my listening room: "Those are the nicest electric room heaters I've ever seen".
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Need help with Teac A-6300 and Sansui SD-7000!! - otari 09:27:15 08/06/06 (0)