In Reply to: Sweet! posted by Ronnie Ericsson on August 25, 2006 at 12:30:19:
30V is the absolute max value. 24V is the practical max value.
With 24V:
Use a 33kohm resistor as collector load, you'll get about 0,6mA collector curent when on, which is fine.
As for the LED, use a 2,2KOhm resistor in serie with the anode. You'll get 10mA LED current, which is fine.I would advise you to use some timer (a simple 555 would make the job fine) in order to get a pulse with a predetermined duration, which would be used to lift the tonearm.
In this case, have the voltage at about 12V. Decrease resistors in accordance.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Sweet! - Jacques 01:35:50 08/28/06 (3)
- Re: Sweet! - Ronnie Ericsson 13:14:58 08/30/06 (2)
- Re: Sweet! - Jacques 09:41:19 09/06/06 (1)
- Aha! Thanks a lot! (nt) - Ronnie Ericsson 04:54:09 09/09/06 (0)