Home SET Asylum

Single Ended Triodes (SETs), the ultimate tube lovers dream.

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ SET Asylum ]
[ Alert Moderator ]

RE: What tubes to use with this Interstage Transformers?

If you look at a circuit from two different points you will get two different answers.

from the perspective of the source (ie 50r output of the signal generator) the 5K series resistor becomes part of the load.

from the perspective of the transformer primary, the 5K resistor becomes part of the source impedance.

when you want to analyze a source / load combo you need to take a single point in the circuit and then look at all of the paths to ground. In this case the only thing of interest is the primary of the transformer so looking backwards the source impedance driving it becomes the parallel combo of every path to ground. Take a signal generator with a 50 ohm output and parallel it with a 1 ohm resistor to ground and your source impedance is now just under an ohm.

dave

This post is made possible by the generous support of people like you and our sponsors:
  Parts Connexion  

Follow Ups Full Thread
Follow Ups
FAQ

Post a Message!

 Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]