In Reply to: Need some opinions and maybe a lot of help with 300B design. posted by gavinhaley on March 14, 2016 at 10:38:13:
A reasonable design, but you won't get a lot of power - maybe 3-4 watts. To get more, raise the 300B plate voltage or reduce the output transformer impedance (and raise the plate current). Or do both.Here is the WE table of 300B operating points:
p-k Bias Current Load Power 2nd 3rd
Volts Volts mA Ohms Watts db db
200 -42 30 2000 3.0 20 31
200 -39 40 2500 2.6 26 38
200 -37 50 2500 2.5 30 45
250 -55 30 2000 4.9 18 27
250 -55 30 4500 3.2 27 40
250 -52 40 3000 4.0 26 36
250 -50 50 2500 4.4 26 39
250 -48 60 2000 4.7 26 38
250 -48 60 2700 4.1 30 45
250 -45 80 1500 5.0 26 41
300 -65 40 2500 6.7 20 30
300 -63 50 2000 7.2 21 29
300 -63 50 3000 6.1 26 37
300 -61 60 2400 6.6 26 37
300 -61 60 3400 5.6 30 44
300 -58 80 1700 7.5 26 37
350 -76 50 3600 7.8 26 38
350 -76 50 5000 6.2 30 45
350 -74 60 2000 10.2 21 30
350 -74 60 3000 8.3 26 38
350 -74 60 4000 7.0 30 44
350 -71 80 2200 9.6 26 39
400 -91 40 5000 8.4 26 37
400 -89 50 3000 11.5 21 31
400 -89 50 4000 9.4 25 38
400 -87 60 3500 10.5 26 38
400 -87 60 5000 8.3 30 46
400 -84 80 2500 12.5 25 37
450 -104 40 6000 9.5 26 38
450 -102 50 5000 10.7 27 39
450 -102 50 6500 9.0 30 45
450 -100 60 4000 12.5 26 38
450 -100 60 5500 10.1 30 44
450 -97 80 2000 17.8 21 30
450 -97 80 3000 14.6 26 37
450 -97 80 4500 11.5 31 45When the second harmonic distortion at full power is 26dB down, that's 5%. That's a good middle-of-the-road value IMHO.
Edits: 03/14/16
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Need some opinions and maybe a lot of help with 300B design. - Paul Joppa 13:44:58 03/14/16 (5)
- RE: Need some opinions and maybe a lot of help with 300B design. - gavinhaley 13:55:01 03/14/16 (4)
- RE: Need some opinions and maybe a lot of help with 300B design. - Triode_Kingdom 15:25:19 03/14/16 (1)
- RE: Need some opinions and maybe a lot of help with 300B design. - Paul Joppa 17:35:37 03/14/16 (0)
- RE: Need some opinions and maybe a lot of help with 300B design. - gavinhaley 13:56:49 03/14/16 (1)
- RE: Need some opinions and maybe a lot of help with 300B design. - Paul Joppa 18:55:32 03/16/16 (0)