In Reply to: Don does use AC on 45 based amps posted by 2chJunkie on November 11, 2006 at 10:17:33:
Hi yall,Here is the deal folks, with a 45 or 2A3, you have a 2.5 VAC filament voltage and you CAN use AC, which DOES sound better than DC, on those tubes.
With a 300B you have a 5 VAC filament voltage, too high for AC, so you are FORCED to go with DC, a compromise. But then, a 300B tube always was and IS a compromise in many ways to a 2A3, so, the best SE amp you can build is not a 300B, but a 2A3, run at lower current, about 45 mA instead of 60 mA., and with AC heating on the 2A3. Its HARD, no, impossible, to beat a GOOD 2A3 amp folks.
If your speaker requires more power than a 2A3 can provide, junk em and get more efficient ones....smell de roses.
Jeff Medwin
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Don does use AC on 45 based amps - drlowmu 23:27:46 11/13/06 (9)
- AC on 300B - Jim Hagerman 23:26:45 11/15/06 (4)
- Re: AC on 300B - drlowmu 16:00:31 11/16/06 (1)
- Oops - Jim Hagerman 21:38:42 11/18/06 (0)
- Re: AC on 300B - Naz 15:32:17 11/16/06 (0)
- Re: AC on 300B - Jottow2@yahoo.com 06:51:26 11/16/06 (0)
- There you go again ... - Naz 14:09:13 11/14/06 (2)
- Re: There you go again ... - drlowmu 19:46:24 11/14/06 (1)
- Re: There you go again, again... - Naz 20:56:28 11/14/06 (0)
- Additionally - drlowmu 06:42:47 11/14/06 (0)