Home SET Asylum

Single Ended Triodes (SETs), the ultimate tube lovers dream.

Re: That's not the heater supply

Well, that's what I was told. Anyway mine came without BR1 installed. So I hooked it up and it tamed quite a bit of hum.

BTW - If yours still hum, they can be made 'dead silent' - I use 104db speakers too. Try lifting the ground on your Moondogs with a cheater plug and see if the remaining hum disappears. If it does, you'll know you have a ground loop problem and can work on that to remove the remaining hum. That was the last source of hum on mine.

I was convinced that it was not ground loop hum until I tried it. But indeed it was, slight but it was there!



Cut-Throat





This post is made possible by the generous support of people like you and our sponsors:
  Amplified Parts  


Follow Ups Full Thread
Follow Ups
  • Re: That's not the heater supply - Cut-Throat 14:10:35 11/10/06 (0)


You can not post to an archived thread.