|
SET Asylum Single Ended Triodes (SETs), the ultimate tube lovers dream. |
|
|
|
SET Asylum Single Ended Triodes (SETs), the ultimate tube lovers dream. |
|
In Reply to: Re: I want to build a parallel 845 SET amp posted by MIchael Samra on October 12, 2006 at 13:23:22:
>> Naz Circosta is using a parallel SE 845 on the logan statements and he adores it..Of course he the SET amp is running the panels only from 170hz on up at 24db/oct.Mikey, excuse me for butting in but I'm actually running both the ESLs and the (conventional) Mid Bass Array off the 845s ... and in full range mode. The crossover between the ESLs and the Mid Bass is indeed at 170Hz. The Mid Bass array does not start to taper until about 70 - 80Hz, which is why I my subs are limited to 50Hz with the 24db /Oct filter. There is enough output from the combination of both from 50 - 80Hz to provide a smooth overall response but I like to keep the subs right away from the real music, and it works!
If you are running only the ESL panels with the 845s then I tend to agree with Ed that you shouldn't need all that much power. But I guess that depends on how loud you like your music!
Cheers,
Naz
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Minor correction ... - Naz 00:14:00 10/13/06 (1)
- Re: Minor correction ... - MIchael Samra 01:02:42 10/13/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
