|
Propeller Head Plaza Technical and scientific discussion of amps, cables and other topics. |
|
|
|
Propeller Head Plaza Technical and scientific discussion of amps, cables and other topics. |
|
In Reply to: RE: "when you change the resistor values" ... posted by andyr on August 20, 2024 at 15:57:11:
Hi
My thought was that assuming one kept the output Voltage the same as you changed the input divider ratio, that one would see the distortion is constant with output level- or -it changes according to the input divider even when the output voltage is held constant.
The emitter follower output run class A should not add much distortion, the current source likewise but they ARE part of the circuit and can't be ruled out when tracking something down.
Better question might be what do you want to build?
This circuit seems like a design for very low level signals?
Tom
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: "when you change the resistor values" ... - tomservo 05:37:21 08/21/24 (1)
- RE: "what do you want to build?" ... - andyr 15:30:30 08/21/24 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]