Propeller Head Plaza Technical and scientific discussion of amps, cables and other topics.

---

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Propeller Head Plaza ]

---

[ Alert Moderator ]

---

RE: Transformer secondary measurement

Posted by Cleet Torres (A) on August 6, 2013 at 19:06:49

In Reply to: RE: Transformer secondary measurement posted by tesla on August 5, 2013 at 19:16:54:

Hi Tesla

Thanks for your response.

I've don't have a dual secondary; two wires into the primary side 115V, and two wires out the secondary 25V.

Now on the primary side I get a hot and neutral in from the mains, right? I was wondering if the output on the secondary would be the same i.e. one hot, one neutral?

I'm thinking on the secondary both lines would be hot, and the voltage across the lines would be 25VAC. In short, my input to the primary is unbalanced, but the out would be balanced. (Unless of course I tie one of the outputs to ground that is)

Thanks
Cleet

This post is made possible by the generous support of people like you and our sponsors:

Parts Connexion

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---