In Reply to: Re: Passive Crossover Question posted by Bill Fitzmaurice on September 5, 2005 at 06:47:24:
I had no trouble getting a readable print, just click on the small image. You might email Ralph Nichols at B&C's U.S. office about specific types of components(if Kwatson is in North America, otherwise, check the B&C website for the appropriate distributor).
In high power crossovers, Bill has mentioned appropriate types of components. One point about differences between iron core and air core coils is the iron core types are probably needed in the low pass sections, as they generally have higher power ratings available along with keeping DCR readings low with the higher inductances found in low pass sections. I would try an air core inductor in the high pass section, along with the 260v poly caps(Solen are one example).
Possible sources:
www.madisound.com
www.partsexpress.com
www.solen.caBest regards,
John Halliburton
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Passive Crossover Question - johnservo 07:00:45 09/06/05 (0)