Home Pro Audio Asylum

Pro studio recording equipment and music production/industry.

Re: best 2" exit driver suggestion, RCF, B&C, Beyma or JBL?

You might also consider the BMS 4590P coaxial 2" exit compression driver, which would automatically add tweeter to the mix on the same HF horn, and will easily go down to 500Hz. The crossover point from the larger diaphragm to the smaller one is 6.3kHz, passive. You can also skip their passive X-over and save yourself the extra $20 if you are already set up for a 4-way active system. If you're unfamiliar with BMS, you can check it out at www.bmspro.com (Germany) or on the US distributor's website at www.assistanceaudio.com.


This post is made possible by the generous support of people like you and our sponsors:
  Schiit Audio  


Follow Ups Full Thread
Follow Ups
  • Re: best 2" exit driver suggestion, RCF, B&C, Beyma or JBL? - Cuppa Joe 12:44:30 08/14/05 (0)


You can not post to an archived thread.