In Reply to: Just a FYI. posted by one50 on January 3, 2002 at 17:39:15:
While I agree with both posts concerning the adoption of Pin#2 as the standard Hot pin, there is much less "standardization" than anyone might believe. In my home studio it is very close to 50-50, half pin#2, half pin#3. (and I have a LOT of gear) The good news is that for casual work, it usually doesn't really matter as most things "work" even when connected pieces of gear conflict regarding the Pin polarity. But if you are doing professional work, you really do need to resolve this issue.
digital? I'm still not sure about transistors....
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Just a FYI. - hollywood_steve 20:16:41 01/03/02 (0)