|
Pro Audio Asylum Pro studio recording equipment and music production/industry. |
|
|
|
Pro Audio Asylum Pro studio recording equipment and music production/industry. |
|
In Reply to: Ramsa wp-9055 Any good for Hi-Fi use? posted by tweakk on March 11, 2010 at 10:49:42:
Keep in mind this is setup for +4db and not the home stereo -10db
Consumer gear is .3volts
Pro gear is 1.2volts
The difference between 1.2 volts and 0.3 volts is a 4:1 ratio, which is about 12dB. This means that, when you feed a consumer-level signal into an input that is set up for professional-level signals, it will be 12dB lower than you expected. It also means that when you feed a professional-level signal into an input that is set up for consumer-level signals, it will be 12dB stronger than you expected. On a pot, the gain difference between halfway up and all the way up is usually about 15dB, so you can see that a 12dB difference is significant.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Ramsa wp-9055 Any good for Hi-Fi use? - Pro Sound Guy 07:52:05 03/17/10 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
