In Reply to: RE: Crossovers were do i use them? posted by Nttrbl on April 20, 2009 at 15:54:58:
Ok I found something on that xover
You can use it 3-way stereo or 5 way mono
So...you have an issue because you only have one power amp
Here is what I suggest you do
Dont use the xover for with your setup
Run out of the mixer straight into the power amp and then from
the power amp you can use two Yamahas per side or one Yamaha per side
of the amp
Your Furman is NOT going to work with what you currently have
Go out and purchase a two way stereo xover and use it in a setup
as I described in my previous post OR go out and get another power
amp and run three way.
I would say the easy thing to do is this
I think your probably on a budget so the cheap way out is to get
yourself a Behringer 2 way stereo xover
Click the link below to see the xover you should get
The xover comes with complete instructions on how to use it and set it
up with what you have.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Crossovers were do i use them? - Pro Sound Guy 06:53:37 04/21/09 (3)
- RE: Crossovers were do i use them? - Nttrbl 08:25:59 04/21/09 (2)
- RE: Crossovers were do i use them? - Pro Sound Guy 21:31:57 04/21/09 (1)
- RE: Crossovers were do i use them? - Nttrbl 01:29:01 04/22/09 (0)