|
Computer Audio Asylum Music servers and other computer based digital audio technologies. |
|
|
|
Computer Audio Asylum Music servers and other computer based digital audio technologies. |
|
In Reply to: RE: EMU posted by chopper87@aol.com on July 18, 2009 at 06:43:07:
Just a few more things.
When you hear someone say a DAC runs at USB2.0 they usually mean that it runs using high speed mode. Its a bit of a misnomer since USB spec 2.0 covers all three speeds.
USB 2.0 is supposed to be backwards compatible with 1.1, thus a 2.0 device plugged into a 1.1 port should still work, but only at full speed. Similarly a 1.1 device plugged into a 2.0 port will work but only at full speed.
The 0404USB is a bit unusual in this regard, it ONLY runs at high speed, so if you plug it into a 1.1 port (there are still a few out there) it will not connect because the 1.1 port cannot support the speed it needs.
John S.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: EMU - John Swenson 10:07:23 07/18/09 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
