In Reply to: Re: Trouble with newly built PC. Help! posted by tom1356 on December 31, 2006 at 18:15:13:
remove any other cards.It should post - if it doesn't
Take everything out of the case and reboot it outside the case.
Just be sure nothing touches anything else and doesn't touch metal.
Again use only mobo, Cpu, mem, power supply, video - take everything apart and reseat everything carefully, when hooking up leads use only the power supply leads to the motherboard and the fan for the CPU - make sure the cpu fan well seated.
Don't hook up any of the other leads -
Use a screwdriver and short the power on leads/pins to boot it -
If it won't post and go to the bios, borrow or swap out and try another power supply.
If that doesn't do it, I think you're looking at calling tec support - or at least that's the best I can do at 10:00
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Use only Mobo, CPU, mem, power supply and monitor - Triodeuser 19:19:32 12/31/06 (1)
- if you can't get it to run outside the case - Triodeuser 19:29:11 12/31/06 (0)