In Reply to: 6C33C-B Circuit posted by Slick on April 13, 2006 at 04:46:02:
Most any triode OTL circuit will work. You will have to set a different bias voltage on the grids which is not challenging. The bias current probably ought not to exceed 250mA per section after 1 hour warmup. This assumes a plate voltage of about 130 volts. The spec sheets indicate that it might be wise to run a slightly lower plate voltage as it will give you more current overhead. Don't forget to allow room for fuses for each tube!
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: 6C33C-B Circuit - Ralph 10:56:58 04/13/06 (3)
- Re: 6C33C-B Circuit - Slick 11:51:17 04/13/06 (2)
- Re: 6C33C-B Circuit - Ralph 13:08:09 04/13/06 (1)
- Thanks for the useful info - Slick 13:22:23 04/13/06 (0)