OTL Asylum OTL, Output Transformerless Amplifier User Group.

---

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ OTL Asylum ]

---

[ Alert Moderator ]

---

Addendum

Posted by Lew (A) on January 20, 2016 at 14:54:50

In Reply to: Keep the 1K resistors (or whatever the value)... posted by Lew on January 18, 2016 at 16:40:30:

Cousin, If you really want to get adventurous, you could try using an inductor in place of the 1K resistor. The problem you may encounter if you want to do that will be lack of space, but perhaps you can identify a physically small inductor that would work. Note also that since the inductor will probably have a DC resistance less than 1000 ohms, this will cause a very slight rise in voltages delivered to the circuit, probably not enough to throw anything out of whack, especially since physically small inductors tend to have relatively high-ish DC resistance, albeit probably not more than a few hundred ohms. I realized that I kept saying nay to all your ideas for tweaks, and this goes against my own sense of adventure when it comes to tweaking.

This post is made possible by the generous support of people like you and our sponsors:

VH Audio

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---