In Reply to: OK- its an older 12-tube model posted by Ralph on September 25, 2015 at 14:10:27:
Older 12 tube but brought up to 3.1 status. I first switched the cables at the preamp side to see if it was the preamp but got the same lackluster performance from the same channel and then switched cables at the amp side to see if it was a bad cable but it was the same lesser sound from that amp side. I will try the speaker cables next to make sure I don't have a dirty connection or that the cleaning lady did not knock something loose from the Zero autoformers.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: OK- its an older 12-tube model - ChasLieb 14:34:03 09/25/15 (10)
- RE: OK- its an older 12-tube model - Ralph 13:17:23 09/28/15 (9)
- RE: OK- its an older 12-tube model - ChasLieb 18:42:31 09/28/15 (8)
- RE: OK- its an older 12-tube model - ChasLieb 18:52:46 09/28/15 (7)
- All the 6SN7s must be in place and as many of the power tubes as possible. - Ralph 09:28:56 09/29/15 (4)
- RE: Somehow it involved a fuse - ChasLieb 17:16:52 09/29/15 (3)
- RE: Somehow it involved a fuse - Ralph 18:29:25 09/29/15 (2)
- RE: Somehow it involved a fuse - ChasLieb 19:01:39 09/29/15 (1)
- RE: Somehow it involved a fuse - Ralph 10:02:22 10/01/15 (0)
- RE: OK- its an older 12-tube model - Lew 06:42:09 09/29/15 (0)
- RE: OK- tested the grid voltages on all 6as7 sockets - ChasLieb 19:05:35 09/28/15 (0)