In Reply to: RE: NYAL OTL 3 posted by naidu on March 28, 2011 at 03:28:41:
Hi,
Need to revive this thread as I still have not resolved the issue. To recap:
VI developes an orange glow upon switch on. It is similar when moved to V2 and V3 position. V1 is OK in V6-V8 position. V2 and V3 are OK in V1 position. V6-V8 also glow in V1-V3 position but are OK in their original postion. In addition to the glow the affected tubes get extremely hot.
I have since purchased 10 6LF6 tubes but each has a similar problem in V1-V3 position.
Have not attempted biasing in view of the overheating.
Inputs on what could be wrong would be appreciated.
As a last ditch measure, am considering converting the amps to OTL 3Q as I would then need only 4 6LF6 tubes. The lower power output is OK as dont need much power to drive the Tannoy HPD385(8 Ohms, 91db), previously driven by late Geroge Wright's 2A3 monos (3.5 Watts).
Assistance from members would be appreciated.
Thanks and Regards,
Nara
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: NYAL OTL 3 - v_n_naidu@hotmail.com 02:01:01 05/23/12 (9)
- RE: NYAL OTL 3 - Banat 03:45:34 05/23/12 (8)
- RE: NYAL OTL 3 - v_n_naidu@hotmail.com 04:30:13 06/05/12 (7)
- RE: NYAL OTL 3 - Banat 09:26:22 06/05/12 (6)
- RE: NYAL OTL 3 - v_n_naidu@hotmail.com 01:17:04 06/06/12 (5)
- RE: NYAL OTL 3 - 714rhino 02:48:12 06/08/12 (4)
- RE: NYAL OTL 3 - v_n_naidu@hotmail.com 01:18:00 06/11/12 (3)
- RE: NYAL OTL 3 - 714rhino 21:27:37 06/19/12 (2)
- RE: NYAL OTL 3 - v_n_naidu@hotmail.com 06:40:55 06/20/12 (1)
- RE: NYAL OTL 3 - 714rhino 19:25:17 06/20/12 (0)