|
OTL Asylum OTL, Output Transformerless Amplifier User Group. |
|
|
|
OTL Asylum OTL, Output Transformerless Amplifier User Group. |
|
In Reply to: Re: not to worry.... posted by kolbay@axelero.hu on September 13, 2005 at 23:17:08:
On the one hand, that (1.2A fuse) does not sound big enough. In theory, it would blow when the speaker draws a little more than 12W (P = I[squared]*R, where I = 1.2A and R = presumed 8-ohm speaker impedance). On the other hand, a fuse is an all or nothing connection, so I cannot figure out why it is causing a loss of "dynamics". Of course, if you have high-impedance speakers (>>8 ohms) that are very efficient, this could account for the apparent fact that you are not blowing fuses all the time. Seems like you could safely use a heftier fuse. Also, as I mentioned to you privately, I recently treated my fuses and fuse-holders with Walker Audio SST contact enhancer, to good effect.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: not to worry.... - Lew 08:00:53 09/15/05 (5)
- Re: not to worry.... - kolbay@axelero.hu 23:45:11 09/15/05 (4)
- Re: not to worry.... - Tom Dawson 07:47:53 09/21/05 (2)
- Re: not to worry.... - kolbay@axelero.hu 01:25:35 09/23/05 (1)
- Re: not to worry.... - Tom Dawson 09:26:20 09/27/05 (0)
- Re: not to worry.... - Lew 07:13:49 09/16/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
