Home OTL Asylum

OTL, Output Transformerless Amplifier User Group.

Re: Joule / 6C33C-B questions

150.148.0.65

What JLH says is true, according to most users. However, I have not cleaned my tube pins or sockets in 5 years and have had no problems. I think the need for maintenance is related to the provenance of the sockets. The older sockets were apparently made differently and don't tend to corrode with age, or have less of such a tendency anyway.
As for the tubes themselves, I have heard scuttlebutt (defined as unreliable gossip) to the effect that tubes made prior to 1992 or thereabouts are more reliable than later production. Victor Khomenko of BAT knows a great deal about the various sources for 6C33Cs in Russia, and you might consult him for advice on how and where to purchase the best that are available. My amplifiers use twelve 6C33Cs (six per monoblock), and I have had no failures after 5 years on the original set of 12.


This post is made possible by the generous support of people like you and our sponsors:
  Amplified Parts  


Follow Ups Full Thread
Follow Ups
  • Re: Joule / 6C33C-B questions - Lew 07:07:48 01/03/05 (0)


You can not post to an archived thread.