72.94.242.152
This Post Has Been Edited by the Author
In Reply to: RE: Using the calculations I arrive at a B+ of around 444V posted by Bas Horneman on February 14, 2011 at 12:09:44
Hi Bas:
I should have taken more time in my initial post to state more clearly that this design (at this stage of development) was and is intended as a "topological" schematic. By that I mean--- what I wanted to do was to show a "black box" topography of what the circuit would look like and then present it to my customer in China for his consideration.
So in no way is it a complete design--- notice that there is not a plate voltage noted for the anode of the 6C33C and the actual value which we had in mind is, in fact, substantially less than 300VDC. So a lot of detailed values have been left out (and in some cases not fully calculated) since this was intended to be a study document.
Which,thanks guys, I asked for and received some comments and suggestions. All of which are appreciated.
Builder of MagneQuest & Peerless transformers since 1989
Follow Ups: