• Welcome to the MagneQuest/Peerless forum. - mqracing 22:55:36 05/05/04 (0)
• Magnetics Library - Last update, November 3, 2004

• MQ power transformers - Jim Dowdy 09:22:57 07/27/24 (2)
  • RE: MQ power transformers - Topper 12:06:17 07/31/24 (1)
    • RE: MQ power transformers - Jim Dowdy 13:35:12 07/31/24 (0)
• Has anyone got pictures of their amp with fs100pf parafeed - Bas Horneman 02:29:25 06/20/24 (8)
  • Found some on HifiHaven. By Paul Birkeland .nt. - Bas Horneman 08:30:57 06/21/24 (7)
    • RE: Found some on HifiHaven. By Paul Birkeland .nt. - triode3 03:05:12 06/23/24 (6)
      • Picture - Bas Horneman 13:16:53 06/24/24 (4)
        • Another Picture - Paul Joppa 11:56:28 06/26/24 (3)
          • correction - Paul Joppa 08:31:25 07/01/24 (1)
            • Thanks for the clarification! nt - Bas Horneman 00:37:17 07/02/24 (0)
          • Thanks Paul. nt - Bas Horneman 01:54:54 07/01/24 (0)
      • Sure - Bas Horneman 02:59:42 06/24/24 (0)
• First of two SETH rebuild - boatshed 11:01:41 04/13/24 (4)
  • RE: First of two SETH rebuild - Colonel Sanders 07:08:01 08/26/24 (0)
  • I suppose the exo-173 is under the hood? nt - Bas Horneman 01:37:17 04/17/24 (2)
    • RE: I suppose inside foto - boatshed 09:37:35 04/18/24 (0)
    • RE: I suppose the exo-173 is under the hood? nt - boatshed 05:25:45 04/18/24 (0)
• Almost done 2a3 parafeed with Magnequest FS100 PC 60mA/120H - Bas Horneman 06:49:42 02/08/24 (16)
  • Amp schematic - Bas Horneman 00:25:31 02/20/24 (4)
    • RE: Amp schematic - boatshed 05:53:48 02/21/24 (3)
      • RE: Amp schematic - Bas Horneman 02:26:52 02/22/24 (2)
        • RE: Amp schematic - boatshed 06:07:20 02/22/24 (0)
        • RE: Amp schematic - Bas Horneman 02:27:21 02/22/24 (0)
  • Power supply schematic - Bas Horneman 00:23:04 02/20/24 (0)
  • RE: Almost done 2a3 parafeed with Magnequest FS100 PC 60mA/120H - Bas Horneman 08:13:06 02/16/24 (3)
    • I will say - Story 08:45:48 02/16/24 (2)
      • Better! nt. - Bas Horneman 09:23:23 02/16/24 (1)
        • Just kidding. Beauty is in the eye of the beholder - Bas Horneman 04:02:27 02/18/24 (0)
  • During times like this I was Mike was alive. Why did I wait - Bas Horneman 04:05:09 02/16/24 (0)
  • With tubes. First smoketest passed (ht off) - Bas Horneman 07:15:34 02/15/24 (0)
  • RE: Almost done 2a3 parafeed with Magnequest FS100 PC 60mA/120H - boatshed 19:30:39 02/13/24 (3)
    • It was a one off series in 2009 - Bas Horneman 00:48:08 02/14/24 (2)
      • RE: It was a one off series in 2009 - boatshed 08:54:27 02/14/24 (1)
        • RE: It was a one off series in 2009 - Bas Horneman 23:09:12 02/14/24 (0)
• wtb Cobalt EXO-046 - seta801a 09:17:30 01/29/24 (0)
• used irons - boatshed 11:16:08 01/27/24 (14)
  • Thank you very much boatshed! I will put them to good use! nt - Bas Horneman 07:58:49 02/07/24 (0)
  • RE: used irons - boatshed 07:04:02 02/07/24 (0)
  • RE: used irons - triode3 15:21:09 02/01/24 (3)
    • RE: used irons - boatshed 15:36:57 02/02/24 (1)
      • RE: used irons - triode3 06:24:10 02/06/24 (0)
    • RE: used irons - boatshed 14:58:12 02/02/24 (0)
  • I can't send you email - Bas Horneman 04:52:12 02/01/24 (1)
    • RE: I can't send you email - boatshed 14:59:17 02/02/24 (0)
  • RE: used irons - seta801a 09:11:42 01/29/24 (5)
    • RE: used irons - boatshed 15:08:24 02/02/24 (4)
      • RE: used irons - seta801a 13:12:49 02/03/24 (3)
        • RE: used irons - boatshed 11:33:28 02/04/24 (1)
          • RE: used irons - SETA45 12:25:45 02/04/24 (0)
        • RE: used irons - seta801a 19:27:55 02/03/24 (0)
• new/used MQ irons - boatshed 13:08:28 01/25/24 (2)
  • RE: new/used MQ irons - David McGown 14:40:39 01/25/24 (1)
    • RE: new/used MQ irons - boatshed 21:43:14 01/25/24 (0)
• WTB - MagneQuest FS 100 10k output transformers - rusty jefferson 05:59:14 01/10/24 (0)
• pair EXO-173 wanted - Jim Dowdy 04:55:24 11/03/23 (1)
  • RE: pair EXO-173 wanted - boatshed 08:48:30 01/27/24 (0)
• MagneQuest S-265-A Wiring diagram - Moukin 07:04:37 10/21/23 (5)
  • Perhaps a picture? Here is the hookup for the MQ 565 - Bas Horneman 07:34:17 10/23/23 (4)
    • RE: Perhaps a picture? Here is the hookup for the MQ 565 - Moukin 05:55:46 10/24/23 (3)
      • I would try also to post over on Tube DIY Asylum - Bas Horneman 07:48:19 10/24/23 (2)
        • RE: I would try also to post over on Tube DIY Asylum - Moukin 03:17:12 10/25/23 (1)
          • Excellent. I knew there was something out there...nt - Bas Horneman 04:01:22 10/25/23 (0)
• Going though Mike's stuff anyone know what a BH5 & 6 are? - Gordon Rankin 08:29:59 09/11/23 (7)
  • RE: Going though Mike's stuff anyone know what a BH5 & 6 are? - OldNuke 17:30:39 10/12/23 (1)
    • RE: Going though Mike's stuff anyone know what a BH5 & 6 are? - Gordon Rankin 06:04:42 10/13/23 (0)
  • RE: Going though Mike's stuff anyone know what a BH5 & 6 are? - Paul Joppa 15:57:08 09/11/23 (2)
    • RE: Going though Mike's stuff anyone know what a BH5 & 6 are? - Paul Joppa 18:08:04 09/11/23 (1)
      • RE: Going though Mike's stuff anyone know what a BH5 & 6 are? - Gordon Rankin 07:14:44 09/12/23 (0)
  • RE: Going though Mike's stuff anyone know what a BH5 & 6 are? - Caucasian Blackplate 15:54:19 09/11/23 (1)
    • RE: Going though Mike's stuff anyone know what a BH5 & 6 are? - Gordon Rankin 07:16:12 09/12/23 (0)
• Anyone have any RGC6 they can spare? - Gordon Rankin 09:36:14 09/01/23 (0)
• Mike's passing - Gordon Rankin 10:37:58 03/26/23 (13)
  • RE: Mike's passing - anystereo1 05:57:49 06/13/23 (0)
  • RE: Mike's passing - Jim Dowdy 09:23:50 04/01/23 (0)
  • RE: Mike's passing - triode3 15:23:17 03/28/23 (0)
  • Service - Gordon Rankin 12:00:28 03/27/23 (0)
  • RE: Mike's passing - mwiebe 06:13:48 03/27/23 (5)
    • Would love to hear some ot those stories... - Bas Horneman 07:13:35 03/27/23 (4)
      • RE: Would love to hear some ot those stories... - mwiebe 10:30:12 03/29/23 (0)
      • RE: Would love to hear some ot those stories... - mwiebe 14:53:18 03/28/23 (2)
        • Thanks....nt - Bas Horneman 14:20:46 04/04/23 (1)
          • RE: Thanks....nt - sony6060 03:20:23 06/09/23 (0)
  • Funeral arrangements - Bas Horneman 01:15:51 03/27/23 (0)
  • My condolences to all who knew and loved him - Bas Horneman 01:14:18 03/27/23 (0)
  • RE: Mike's passing - xcortes 20:07:17 03/26/23 (0)
• Interest in silver outputs. - xcortes 19:31:08 03/21/23 (1)
  • The title should say "Interest in silver outputs?" (nt) - xcortes 08:37:06 03/22/23 (0)
• MQ iron for sale - xcortes 16:19:33 02/09/23 (12)
  • RE: MQ iron for sale - Pete B. 14:06:42 07/28/23 (0)
  • RE: MQ iron for sale - Pete B. 14:05:44 07/28/23 (0)
  • RE: MQ iron for sale - Pete B. 13:34:18 07/28/23 (0)
  • Almost all gone and some more! - xcortes 11:34:43 03/18/23 (3)
    • Which type of b7? nt - Bas Horneman 06:18:57 03/19/23 (2)
      • What is the primary impedance of the b7? nt - Bas Horneman 04:47:23 03/20/23 (1)
        • RE: What is the primary impedance of the b7? nt - xcortes 13:03:00 03/20/23 (0)
  • RE: MQ iron for sale - m17xr2b 10:32:36 03/13/23 (0)
  • BCM11 Sold - xcortes 08:03:37 02/19/23 (0)
  • Two sets of TL404s sold - xcortes 06:22:11 02/15/23 (0)
  • RE: MQ iron for sale - OldNuke 18:54:33 02/13/23 (1)
    • RE: MQ iron for sale - xcortes 00:43:13 02/14/23 (0)
• TL-404 , more than one version for impedance taps? - Ian L 12:33:05 01/13/23 (4)
  • RE: TL-404 , more than one version for impedance taps? - mwiebe 06:02:14 01/23/23 (3)
    • RE: TL-404 , more than one version for impedance taps? - Ian L 13:04:43 01/25/23 (2)
      • RE: TL-404 , more than one version for impedance taps? - mwiebe 16:46:16 01/27/23 (1)
        • RE: TL-404 , more than one version for impedance taps? - Ian L 15:50:52 01/30/23 (0)
• Anyone has a pair of EXO-99 available? - tasmaniandevil 04:35:48 06/28/22 (2)
  • Let me have a look. At least if you are interested if they are - Bas Horneman 02:27:00 07/04/22 (1)
    • Decided to keep them. Since I've not heard if you are interested. - Bas Horneman 02:08:27 07/29/22 (0)
• EXO3? Anyone have any to sell? - Gordon Rankin 12:12:36 06/14/22 (0)
• Anyone have any PGP8.2 for sale? - Gordon Rankin 11:02:33 06/05/22 (0)
• Someone is selling pinstripe MQ-565 over at diyaudio - Bas Horneman 00:04:53 06/03/22 (6)
  • RE: Someone is selling pinstripe MQ-565 over at diyaudio - Ed Sawyer 06:45:04 06/09/22 (3)
    • Built this for my son - Bas Horneman 01:49:00 06/10/22 (2)
      • Wow, that's beautiful Bas - Story 02:57:59 06/10/22 (1)
        • Thank you Story! nt - Bas Horneman 00:45:13 06/13/22 (0)
  • Looks like he only wants to sell it as part of a package. nt - Bas Horneman 05:30:19 06/03/22 (0)
  • RE: Someone is selling pinstripe MQ-565 over at diyaudio - Bas Horneman 00:10:29 06/03/22 (0)
• WTB Magnequest TFA 2004 output transformer - tropicalimages@gmail.com 21:01:28 03/26/22 (1)
  • RE: WTB Magnequest TFA 2004 output transformer - zohott 17:57:12 05/26/22 (0)
• Anyone want to trade EXO36 for EXO35? - Gordon Rankin 14:07:11 01/25/22 (0)
• WTB: ADC 8639 (output), ADC 8636 (input), UTC K-9459 (input) Transformers - williamjparry@gmail.com 09:48:19 01/25/22 (0)
• FS-100 Output Wiring - Triode_Kingdom 21:53:11 12/21/21 (6)
  • RE: FS-100 Output Wiring - Gordon Rankin 13:45:57 01/03/22 (1)
    • RE: FS-100 Output Wiring - Triode_Kingdom 18:22:10 01/05/22 (0)
  • RE: FS-100 Output Wiring - Paul Joppa 18:28:08 12/23/21 (3)
    • RE: FS-100 Output Wiring - Triode_Kingdom 21:06:44 12/23/21 (2)
      • RE: FS-100 Output Wiring - Paul Joppa 12:08:13 12/24/21 (1)
        • RE: FS-100 Output Wiring - Triode_Kingdom 19:48:04 12/24/21 (0)
• Altec 17173 Choke Specifications - Triode_Kingdom 15:41:01 11/18/21 (7)
  • RE: Altec 17173 Choke Specifications - Jim Dowdy 12:25:33 12/21/21 (1)
    • RE: Altec 17173 Choke Specifications - Triode_Kingdom 00:13:21 12/22/21 (0)
  • RE: Altec 17173 Choke Specifications - Paul Joppa 16:24:21 12/15/21 (1)
    • Thanks! PM sent. (nt) - Triode_Kingdom 10:32:02 12/16/21 (0)
  • RE: Altec 17173 Choke Specifications - Ian L 21:52:55 12/08/21 (2)
    • RE: Altec 17173 Choke Specifications - Ian L 22:50:45 12/08/21 (1)
      • RE: Altec 17173 Choke Specifications - Triode_Kingdom 10:52:20 12/16/21 (0)
• BAC-300 query - Jim Dowdy 17:43:03 06/11/21 (0)
• WTB MQ-565 - Irate 09:45:06 03/06/21 (3)
  • Me too! - Jim Dowdy 07:39:22 04/18/21 (2)
    • RE: Me too! - Irate 10:29:44 04/22/21 (1)
      • Seller in Canada - Bas Horneman 00:00:52 06/03/22 (0)
• BCM11? - Gordon Rankin 13:23:55 02/18/21 (5)
  • RE: BCM11? - Pete B. 11:30:24 02/19/21 (4)
    • RE: BCM11? - Gordon Rankin 11:43:05 02/19/21 (3)
      • RE: BCM11? - triode3 05:19:26 02/20/21 (2)
        • RE: BCM11? - mwiebe 06:41:21 02/24/21 (0)
        • RE: BCM11? - awsjr 06:26:13 02/24/21 (0)
• Mike, and other makers? - triode3 08:34:26 02/03/21 (2)
  • RE: Mike, and other makers? - Gordon Rankin 13:26:11 02/18/21 (0)
  • your rant - Jim Dowdy 13:28:50 02/05/21 (0)
• B7-5Ks and EXO-01 chokes, value? - hapasternack 10:39:33 01/18/21 (2)
  • RE: B7-5Ks and EXO-01 chokes, value? - triode3 15:57:39 02/02/21 (1)
    • RE: B7-5Ks and EXO-01 chokes, value? - hapasternack 16:32:17 02/02/21 (0)
• FS: EXO-050 full nickel and TL-404 XL - johnsonad 12:23:11 01/15/21 (5)
  • RE: FS: EXO-050 full nickel and TL-404 XL - johnsonad 18:17:53 03/04/21 (0)
  • RE: FS: EXO-050 full nickel and TL-404 XL - johnsonad 16:28:38 01/17/21 (0)
  • RE: FS: EXO-050 full nickel and TL-404 XL - johnsonad 14:11:52 01/17/21 (0)
  • RE: FS: EXO-050 full nickel and TL-404 XL - OldNuke 21:38:20 01/15/21 (0)
  • RE: FS: EXO-050 full nickel and TL-404 XL - Palustris 13:55:39 01/15/21 (0)
• WTB EXO-173PPS - caffeinator 14:52:22 01/04/21 (0)
• FS: EXO-173PPS full nickel - johnsonad 10:44:34 12/29/20 (1)
  • RE: FS: EXO-173PPS full nickel - johnsonad 12:46:34 12/31/20 (0)
• WTB BCP14 - Gordon Rankin 11:45:25 12/17/20 (5)
  • RE: WTB BCP14 - awsjr 06:04:17 12/25/20 (1)
    • RE: WTB BCP14 - Gordon Rankin 10:09:49 12/28/20 (0)
  • RE: WTB BCP14 - nullspace 06:29:14 12/21/20 (2)
    • RE: WTB BCP14 - Gordon Rankin 08:03:36 12/21/20 (1)
      • RE: WTB BCP14 - nullspace 06:10:59 12/22/20 (0)
• WTB EXO-050 - johnsonad 15:39:02 11/21/20 (1)
  • RE: WTB EXO-050 - johnsonad 12:47:00 12/31/20 (0)
• WTB TL-404 - Colonel Sanders 07:45:58 10/21/20 (3)
  • RE: WTB TL-404 - caffeinator 11:55:25 10/30/20 (2)
    • RE: WTB TL-404 - Colonel Sanders 21:57:39 10/30/20 (1)
      • RE: WTB TL-404 - caffeinator 07:25:47 11/28/20 (0)
• WTB EXO-03 - nervous novice 09:14:47 08/06/20 (1)
  • RE: WTB EXO-03 - nervous novice 13:30:48 08/13/20 (0)
• Mike's status - Pete B. 19:11:52 06/26/20 (6)
  • RE: Mike's status - Pete B. 08:04:37 08/26/21 (1)
    • RE: Mike's status - triode3 16:56:26 10/05/21 (0)
  • RE: Mike's status - Gordon Rankin 09:44:02 07/06/20 (1)
    • RE: Mike's status - Colonel Sanders 16:35:30 07/09/20 (0)
  • RE: Mike's status - triode3 12:13:55 07/03/20 (0)
  • Uncertain... - Colonel Sanders 05:00:23 07/03/20 (0)
• Grid choke BCP16 - tasmaniandevil 19:12:49 06/07/20 (3)
  • RE: Grid choke BCP16 - tasmaniandevil 09:54:03 06/15/20 (1)
    • RE: Grid choke BCP16 - tasmaniandevil 09:54:56 06/15/20 (0)
  • RE: Grid choke BCP16 - glenz10183@aol.com 04:41:16 06/13/20 (0)
• Some new Magnequest transformers (B7 and TL404). - FrancescoM 02:43:28 04/19/20 (1)
  • RE: Some new Magnequest transformers (B7 and TL404). - glenz10183@aol.com 09:17:44 04/19/20 (0)
• Anyone having problems with BCP16 GC with Humbucker Winding? - Gordon Rankin 13:20:29 04/15/20 (0)
• Searching for Mike, need some new stuff - OldNuke 22:47:10 02/14/20 (7)
  • RE: Searching for Mike, need some new stuff - Gordon Rankin 12:31:28 02/27/20 (5)
    • RE: Searching for Mike, need some new stuff - OldNuke 15:18:39 02/27/20 (4)
      • RE: Searching for Mike, need some new stuff - Gordon Rankin 09:56:47 04/03/20 (3)
        • RE: Searching for Mike, need some new stuff - anystereo1 17:49:38 10/21/20 (0)
        • RE: Searching for Mike, need some new stuff - OldNuke 10:41:11 04/03/20 (1)
          • RE: Searching for Mike, need some new stuff - OldNuke 23:06:08 04/14/20 (0)
  • RE: Searching for Mike, need some new stuff - Colonel Sanders 06:43:21 02/19/20 (0)
• Trail fit before paint - Lakeshirt 12:01:53 11/20/19 (2)
  • RE: Trail fit before paint - triode3 19:00:09 11/21/19 (1)
    • RE: Trail fit before paint - Lakeshirt 03:38:36 11/22/19 (0)
• Anyone have Mike's new phone#? - Gordon Rankin 12:27:17 07/27/19 (0)
• PushPull 6P1P with MagneQuest MQ-565 - Bas Horneman 01:50:44 06/26/19 (6)
  • RE: PushPull 6P1P with MagneQuest MQ-565 - Johno 01:37:33 09/03/19 (1)
    • Thanks Johno! - Bas Horneman 02:44:01 10/29/19 (0)
  • RE: PushPull 6P1P with MagneQuest MQ-565 - mqracing 17:05:22 07/02/19 (3)
    • RE: PushPull 6P1P with MagneQuest MQ-565 - Bas Horneman 01:34:18 07/03/19 (2)
      • RE: PushPull 6P1P with MagneQuest MQ-565 - triode3 03:44:39 07/10/19 (1)
        • Hi Triode..It´s a generic transformer of the type - Bas Horneman 04:34:36 07/10/19 (0)
• EXO-800 hookup - Bas Horneman 04:51:41 05/08/19 (3)
  • Nevermind...I gathered they are the same as the FS-030 etc - Bas Horneman 04:56:39 05/08/19 (2)
    • Correct. Enjoy! - mqracing 11:09:28 05/08/19 (1)
      • Thanks Mike! I'm sure I will...nt - Bas Horneman 00:04:19 05/09/19 (0)
• Exo-36 designation - tsingle999 04:54:55 04/18/19 (0)
• Parafeed Baby O - xcortes 20:09:08 03/31/19 (4)
  • Pic of top and circuit notes - xcortes 07:24:14 04/05/19 (0)
  • RE: Parafeed Baby O - Sidewinder 12:16:04 04/04/19 (0)
  • 🤩 good job! - mqracing 18:33:44 04/01/19 (0)
  • RE: Parafeed Baby O - Caucasian Blackplate 17:20:47 04/01/19 (0)
• Magnequest Repair? - Prospect 10:27:26 03/10/19 (10)
  • RE: Magnequest Repair? - mqracing 11:55:25 03/14/19 (2)
    • RE: Magnequest Repair? - Prospect 12:35:56 03/14/19 (1)
      • Still looking for a replacement? - Bas Horneman 01:39:24 08/16/19 (0)
  • RE: Magnequest Repair? - glenz10183@aol.com 15:03:28 03/11/19 (6)
    • Gerorge,thanks for reaching out to me on this post. - mqracing 11:56:23 03/14/19 (0)
    • Not too sure what's happening with Mike... - Colonel Sanders 03:51:24 03/12/19 (3)
      • my friend in Australia.... please send me a fresh email or - mqracing 11:58:54 03/14/19 (2)
        • Hi Mike, sent you a text message. - Colonel Sanders 04:10:25 04/03/19 (0)
        • Nice hearing from you Mike! - Colonel Sanders 18:06:49 03/15/19 (0)
    • RE: Magnequest Repair? - Prospect 16:22:36 03/11/19 (0)
• Parafeed Baby O - xcortes 16:22:34 01/06/19 (6)
  • RE: Parafeed Baby O - Gordon Rankin 09:05:13 03/04/19 (0)
  • RE: Parafeed Baby O - EricSan 04:31:11 01/15/19 (0)
  • RE: Parafeed Baby O - mqracing 15:09:38 01/13/19 (0)
  • RE: Parafeed Baby O - Caucasian Blackplate 18:24:31 01/10/19 (0)
  • RE: Parafeed Baby O - OldNuke 20:31:37 01/06/19 (1)
    • RE: Parafeed Baby O - xcortes 06:09:05 01/07/19 (0)
• Magnequest and 5 channel SACD - drbarney1 07:23:40 01/01/19 (1)
  • RE: Magnequest and 5 channel SACD - Pete B. 09:22:47 01/07/19 (0)
• MQ Update - glenz10183@aol.com 19:57:32 12/04/18 (1)
  • Great news! - Jim Dowdy 19:53:29 12/05/18 (0)
• Iron for "Large Richard" - OldNuke 09:49:09 11/28/18 (4)
  • RE: Iron for "Large Richard" - Caucasian Blackplate 12:47:56 11/30/18 (3)
    • RE: Iron for "Large Richard" - OldNuke 20:43:05 01/06/19 (2)
      • RE: Iron for "Large Richard" - xcortes 13:22:49 01/07/19 (1)
        • RE: Iron for "Large Richard" - OldNuke 15:43:12 01/07/19 (0)
• Anyone has a pair of BCP16GC-Ni to sell - Colonel Sanders 09:37:03 10/01/18 (3)
  • RE: Anyone has a pair of BCP16GC-Ni to sell - awsjr 04:42:01 10/02/18 (2)
    • RE: Anyone has a pair of BCP16GC-Ni to sell - Colonel Sanders 19:53:16 10/13/18 (0)
    • RE: Anyone has a pair of BCP16GC-Ni to selgl - Colonel Sanders 09:40:43 10/02/18 (0)
• Anyone would have a copy of the Seth mk II schematic? - Colonel Sanders 09:26:50 10/01/18 (4)
  • RE: Anyone would have a copy of the Seth mk II schematic? - OldNuke 22:33:34 10/01/18 (3)
    • RE: Anyone would have a copy of the Seth mk II schematic? - Colonel Sanders 08:28:59 10/02/18 (2)
      • RE: Anyone would have a copy of the Seth mk II schematic? - triode3 16:42:47 10/02/18 (1)
        • RE: Anyone would have a copy of the Seth mk II schematic? - Colonel Sanders 17:16:27 10/02/18 (0)
• Pinging Mike - Colonel Sanders 06:37:21 09/05/18 (5)
  • RE: Pinging Mike - EricSan 09:01:53 09/10/18 (2)
    • RE: Pinging Mike - Colonel Sanders 16:27:21 09/10/18 (1)
      • RE: Pinging Mike - EricSan 18:51:45 09/10/18 (0)
  • RE: Pinging Mike - awsjr 12:50:36 09/05/18 (1)
    • RE: Pinging Mike - Colonel Sanders 06:06:17 09/06/18 (0)
• BCM-11 and BCP-16 AG - awsjr 03:48:43 09/04/18 (5)
  • RE: BCM-11 and BCP-16 AG - EricSan 19:12:11 09/09/18 (4)
    • RE: BCM-11 and BCP-16 AG - awsjr 04:15:57 09/11/18 (3)
      • RE: BCM-11 and BCP-16 AG - Colonel Sanders 07:48:48 09/11/18 (2)
        • RE: BCM-11 and BCP-16 AG - awsjr 12:30:56 09/13/18 (1)
          • RE: BCM-11 and BCP-16 AG - Colonel Sanders 08:52:30 09/29/18 (0)
• Altec 1570 B output transformer - Cleantimestream 11:50:48 07/24/18 (8)
  • RE: Altec 1570 B output transformer - Caucasian Blackplate 16:16:38 07/25/18 (7)
    • RE: Altec 1570 B output transformer - autospecialty 18:32:13 07/28/18 (5)
      • RE: Altec 1570 B output transformer - Caucasian Blackplate 20:24:04 07/28/18 (4)
        • RE: Altec 1570 B output transformer - autospecialty 23:26:10 07/28/18 (3)
          • RE: Altec 1570 B output transformer - Caucasian Blackplate 07:09:38 07/29/18 (2)
            • RE: Altec 1570 B output transformer - autospecialty 08:08:46 07/29/18 (1)
              • RE: Altec 1570 B output transformer - Caucasian Blackplate 08:13:32 07/29/18 (0)
    • RE: Altec 1570 B output transformer - Cleantimestream 12:46:29 07/26/18 (0)
• EXO-93 - Gordon Rankin 12:24:53 07/07/18 (1)
  • RE: EXO-93 - glenz10183@aol.com 11:13:28 01/12/19 (0)
• FS-100 PF and GM70 and 845 amp DIYers - Tanker 08:06:16 06/16/18 (8)
  • 211 Works Well Also... - Triode_Kingdom 19:15:11 07/22/18 (2)
    • RE: 211 Works Well Also... - Paul Joppa 17:19:02 07/24/18 (0)
    • RE: 211 Works Well Also... - triode3 03:33:34 07/24/18 (0)
  • RE: FS-100 PF and GM70 and 845 amp DIYers - gluca 14:45:32 06/25/18 (2)
    • RE: FS-100 PF and GM70 and 845 amp DIYers - Tanker 20:08:07 06/25/18 (1)
      • RE: FS-100 PF and GM70 and 845 amp DIYers - gluca 00:46:40 06/26/18 (0)
  • RE: FS-100 PF and GM70 and 845 amp DIYers - Paul Joppa 13:15:25 06/20/18 (1)
    • RE: FS-100 PF and GM70 and 845 amp DIYers - Tanker 18:24:47 06/21/18 (0)
• Wanted: all nickel or nickel pinstripe MQ-565s - Jim Dowdy 17:56:52 05/25/18 (4)
  • May I ask what you are planning to do with them? - Bas Horneman 14:03:49 05/30/18 (2)
    • RE: May I ask what you are planning to do with them? - Jim Dowdy 14:10:11 05/30/18 (1)
      • Thanks nt - Bas Horneman 14:01:29 05/31/18 (0)
  • got a pair - thanks! - Jim Dowdy 12:47:33 05/29/18 (0)
• Mike! Parafeed Tranny for 6C33 tube - Tanker 18:52:20 04/10/18 (6)
  • RE: Mike! Parafeed Tranny for 6C33 tube - mqracing 13:47:40 04/15/18 (5)
    • RE: Mike! Parafeed Tranny for 6C33 tube - Gordon Rankin 09:55:35 04/23/18 (2)
      • RE: Mike! Parafeed Tranny for 6C33 tube - Tanker 18:49:29 04/24/18 (1)
        • RE: Mike! Parafeed Tranny for 6C33 tube - Caucasian Blackplate 06:51:22 04/26/18 (0)
    • RE: Mike! Parafeed Tranny for 6C33 tube - Tanker 18:31:37 04/18/18 (0)
    • RE: Mike! Parafeed Tranny for 6C33 tube - Caucasian Blackplate 14:47:10 04/18/18 (0)
• Using the wrong Output Tap To Reflect Higher Primary Impedance - Ardee 08:52:12 02/09/18 (2)
  • RE: Using the wrong Output Tap To Reflect Higher Primary Impedance - Bas Horneman 00:25:59 03/01/18 (1)
    • RE: Using the wrong Output Tap To Reflect Higher Primary Impedance - Ardee 02:45:49 03/01/18 (0)
• WTB: TFA-204 - jdrouin 11:19:29 10/19/17 (0)
• Transformer type attenuator - OldNuke 00:05:07 10/13/17 (9)
  • RE: Transformer type attenuator - Palustris 09:11:16 10/16/17 (8)
    • Used a Passive Preamp previously - OldNuke 22:41:27 10/16/17 (7)
      • RE: Used a Passive Preamp previously - Palustris 09:33:47 10/17/17 (6)
        • RE: Used a Passive Preamp previously - OldNuke 10:31:05 10/17/17 (5)
          • RE: Used a Passive Preamp previously - Paul Joppa 18:06:01 10/17/17 (3)
            • RE: Used a Passive Preamp previously - OldNuke 20:21:53 10/17/17 (2)
              • RE: Used a Passive Preamp previously - Paul Joppa 19:24:27 10/18/17 (1)
                • RE: Used a Passive Preamp previously - Paul Joppa 13:45:22 10/21/17 (0)
          • RE: Used a Passive Preamp previously - Paul Joppa 18:00:30 10/17/17 (0)
• Dowdy choke - deafbykhorns 11:01:32 09/25/17 (1)
  • RE: Dowdy choke - mqracing 10:41:56 09/27/17 (0)
• Wright Mono 8 Schematic & MQ Iron - jdrouin 09:28:04 09/15/17 (7)
  • Wright Mono 8 Schematic 6EM7-300B beta 0.2 - jdrouin 09:44:48 11/07/17 (0)
  • RE: Wright Mono 8 Schematic & MQ Iron - mqracing 16:39:56 09/17/17 (5)
    • Op points for 750R cathode resistor? - jdrouin 08:49:56 09/25/17 (4)
      • RE: Op points for 750R cathode resistor? - Palustris 11:08:51 10/18/17 (3)
        • RE: Op points for 750R cathode resistor? - anystereo 05:45:06 06/01/18 (0)
        • RE: Op points for 750R cathode resistor? - jdrouin 12:16:59 10/18/17 (1)
          • RE: Op points for 750R cathode resistor? - Caucasian Blackplate 20:35:40 10/21/17 (0)
• FS-030 Wiring Diagram - srivenkat 20:45:01 09/01/17 (6)
  • RE: FS-030 Wiring Diagram - srivenkat 06:03:17 09/03/17 (0)
  • RE: FS-030 Wiring Diagram - awsjr 04:35:51 09/03/17 (4)
    • Thank you for posting. - mqracing 15:46:21 09/03/17 (0)
    • RE: FS-030 Wiring Diagram - srivenkat 06:04:27 09/03/17 (2)
      • RE: FS-030 Wiring Diagram - Caucasian Blackplate 18:48:21 09/04/17 (1)
        • RE: FS-030 Wiring Diagram - srivenkat 08:13:48 09/05/17 (0)
• B7-15k - deafbykhorns 17:33:23 09/01/17 (4)
  • RE: B7-15k - mqracing 15:43:46 09/03/17 (3)
    • RE: B7-15k - Tre' 08:55:48 09/24/17 (2)
      • RE: B7-15k - Paul Joppa 19:08:38 10/05/17 (1)
        • Thanks (nt) - Tre' 20:55:08 10/05/17 (0)
• Pinging Mike - OldNuke 11:10:51 08/29/17 (1)
  • RE: Pinging Mike - mqracing 09:11:50 09/01/17 (0)
• Ping Paul Joppa - fitz 09:26:03 06/28/17 (3)
  • RE: Ping Paul Joppa - Caucasian Blackplate 16:32:11 07/13/17 (2)
    • RE: Ping Paul Joppa - Paul Joppa 16:37:35 07/19/17 (0)
    • RE: Ping Paul Joppa - fitz 07:16:19 07/19/17 (0)
• Questionable FS-030's - Caucasian Blackplate 19:42:57 06/15/17 (3)
  • RE: Questionable FS-030's - chrismercurio 19:09:50 06/19/17 (1)
    • RE: Questionable FS-030's - Caucasian Blackplate 23:21:30 06/19/17 (0)
  • RE: Questionable FS-030's - mqracing 20:26:27 06/15/17 (0)
• Parafeed Baby Ongaku - xcortes 15:53:14 05/28/17 (5)
  • Ooo nice...keep us up to date please - Bas Horneman 01:37:31 05/31/17 (0)
  • Here's the "classic" BOs - xcortes 16:04:07 05/28/17 (3)
    • And the whole system - xcortes 16:07:07 05/28/17 (2)
      • RE: And the whole system - triode3 05:49:12 05/29/17 (1)
        • RE: And the whole system - xcortes 08:12:08 05/29/17 (0)
• Rit-5 Jr question - fitz 16:09:33 05/04/17 (4)
  • RE: Rit-5 Jr question - mqracing 09:57:06 05/10/17 (3)
    • RE: Rit-5 Jr question - fitz 16:59:44 05/10/17 (2)
      • RE: Rit-5 Jr question - mqracing 15:47:22 05/18/17 (1)
        • RE: Rit-5 Jr question - fitz 05:57:04 05/19/17 (0)
• TL-404 autoformers. Two pairs available - xcortes 17:18:23 04/03/17 (6)
  • RE: TL-404 autoformers. Two pairs available - OldNuke 23:24:28 04/03/17 (5)
    • RE: TL-404 autoformers. Two pairs available - xcortes 05:06:17 04/04/17 (4)
      • RE: TL-404 autoformers. Two pairs available - OldNuke 22:21:47 05/05/17 (1)
        • RE: TL-404 autoformers. Two pairs available - xcortes 05:37:16 05/06/17 (0)
      • RE: TL-404 autoformers. Two pairs available - OldNuke 09:18:23 04/04/17 (1)
        • RE: TL-404 autoformers. Two pairs available - mqracing 13:37:38 04/04/17 (0)
• Magnequest web site down? - mrubey 09:31:20 03/23/17 (1)
  • RE: Magnequest web site down? - mqracing 11:05:21 03/23/17 (0)
• BH upgrade iron - vetmedrobert@gmail.com 07:31:30 03/23/17 (5)
  • RE: BH upgrade iron - Paul Joppa 08:27:28 03/23/17 (4)
    • RE: BH upgrade iron - vetmedrobert@gmail.com 08:51:40 03/23/17 (2)
      • 801A? - Paul Joppa 11:30:45 03/25/17 (1)
        • RE: 801A? - vetmedrobert@gmail.com 10:08:06 03/26/17 (0)
    • Thank you PJ (nt) - mqracing 08:31:04 03/23/17 (0)
• TFA-204 300B Operating Points - jdrouin 12:34:03 03/07/17 (14)
  • First Simulation - jdrouin 14:42:36 03/11/17 (4)
    • RE: First Simulation - jdrouin 12:05:24 03/12/17 (3)
      • RE: First Simulation - Paul Joppa 20:38:23 04/07/17 (0)
      • RE: First Simulation - Gordon Rankin 16:28:40 03/13/17 (1)
        • RE: First Simulation - jdrouin 18:06:45 03/13/17 (0)
  • RE: TFA-204 300B Operating Points - jdrouin 13:39:17 03/10/17 (2)
    • RE: TFA-204 300B Operating Points - sideliner 21:50:16 03/12/17 (1)
      • RE: TFA-204 300B Operating Points - jdrouin 22:08:26 03/12/17 (0)
  • RE: TFA-204 300B Operating Points - mqracing 14:33:19 03/09/17 (3)
    • RE: TFA-204 300B Operating Points - jdrouin 18:50:31 03/09/17 (2)
      • What's the Turns Ratio of the TFA-204? - jdrouin 20:10:37 03/09/17 (1)
        • RE: What's the Turns Ratio of the TFA-204? - mqracing 20:56:50 03/09/17 (0)
  • RE: TFA-204 300B Operating Points - jdrouin 16:13:49 03/07/17 (0)
  • RE: TFA-204 300B Operating Points - triode3 14:58:29 03/07/17 (0)
• Input Transformer Question - OldNuke 23:20:57 03/06/17 (4)
  • RE: Input Transformer Question - mqracing 02:35:06 03/07/17 (3)
    • RE: Input Transformer Question - OldNuke 10:26:44 03/08/17 (2)
      • RE: Input Transformer Question - OldNuke 21:24:02 03/11/17 (1)
        • RE: Input Transformer Question - OldNuke 22:07:03 05/05/17 (0)
• What speakers to use with 45 single ended amp - UCPQ 07:49:58 02/28/17 (12)
  • RE: What speakers to use with 45 single ended amp - nl 05:15:35 04/04/17 (0)
  • RE: What speakers to use with 45 single ended amp - mqracing 17:09:03 03/06/17 (10)
    • RE: What speakers to use with 45 single ended amp - UCPQ 09:24:32 03/07/17 (9)
      • RE: What speakers to use with 45 single ended amp - OldNuke 09:49:02 03/07/17 (8)
        • RE: What speakers to use with 45 single ended amp - mqracing 10:16:08 03/07/17 (7)
          • RE: What speakers to use with 45 single ended amp - OldNuke 11:11:57 03/07/17 (6)
            • RE: What speakers to use with 45 single ended amp - UCPQ 05:47:35 03/10/17 (5)
              • RE: What speakers to use with 45 single ended amp - glenz10183@aol.com 13:28:41 03/10/17 (4)
                • RE: What speakers to use with 45 single ended amp - UCPQ 17:25:51 03/11/17 (3)
                  • RE: What speakers to use with 45 single ended amp - OldNuke 21:36:37 03/11/17 (0)
                  • RE: What speakers to use with 45 single ended amp - glenz10183@aol.com 18:05:34 03/11/17 (1)
                    • RE: What speakers to use with 45 single ended amp - UCPQ 06:15:17 03/15/17 (0)
• 45 Parafeed Output Transformer - OldNuke 00:49:27 02/26/17 (26)
  • Still looking for 45 Parafeed Output Transformer - OldNuke 21:45:04 04/23/18 (0)
  • RE: 45 Parafeed Output Transformer - mqracing 16:24:18 03/06/17 (3)
    • RE: 45 Parafeed Output Transformer - OldNuke 18:47:52 03/06/17 (2)
      • RE: 45 Parafeed Output Transformer - mqracing 19:22:22 03/06/17 (1)
        • RE: 45 Parafeed Output Transformer - OldNuke 20:35:42 03/06/17 (0)
  • RE: 45 Parafeed Output Transformer - OldNuke 18:30:57 03/04/17 (2)
    • RE: 45 Parafeed Output Transformer - johnsonad 20:54:26 03/04/17 (1)
      • RE: 45 Parafeed Output Transformer - OldNuke 22:25:24 03/04/17 (0)
  • RE: 45 Parafeed Output Transformer - xcortes 10:14:47 02/26/17 (1)
    • RE: 45 Parafeed Output Transformer - OldNuke 11:07:51 02/26/17 (0)
  • RE: 45 Parafeed Output Transformer - johnsonad 05:15:49 02/26/17 (15)
    • RE: 45 Parafeed Output Transformer - mqracing 05:59:21 02/26/17 (14)
      • RE: 45 Parafeed Output Transformer - tsingle999 06:32:38 02/26/17 (13)
        • RE: 45 Parafeed Output Transformer - mqracing 16:34:25 03/06/17 (1)
          • RE: 45 Parafeed Output Transformer - tsingle999 13:35:19 03/07/17 (0)
        • RE: 45 Parafeed Output Transformer - OldNuke 11:03:37 02/26/17 (10)
          • RE: 45 Parafeed Output Transformer - mqracing 16:36:47 03/06/17 (1)
            • RE: 45 Parafeed Output Transformer - OldNuke 18:50:01 03/06/17 (0)
          • RE: 45 Parafeed Output Transformer - Ed Sawyer 11:29:46 03/06/17 (1)
            • RE: 45 Parafeed Output Transformer - OldNuke 14:54:40 03/06/17 (0)
          • RE: 45 Parafeed Output Transformer - johnsonad 12:30:36 02/26/17 (5)
            • RE: 45 Parafeed Output Transformer - mqracing 16:45:44 03/06/17 (4)
              • RE: 45 Parafeed Output Transformer - johnsonad 18:13:48 03/06/17 (3)
                • RE: 45 Parafeed Output Transformer - mqracing 18:41:13 03/06/17 (2)
                  • RE: 45 Parafeed Output Transformer - OldNuke 09:12:28 04/04/17 (0)
                  • RE: 45 Parafeed Output Transformer - OldNuke 21:33:44 03/11/17 (0)
• Way off Audio Topic: Motorcycles - mkane77g 17:51:30 02/19/17 (10)
  • RE: Way off Audio Topic: Motorcycles - mqracing 18:56:53 02/21/17 (9)
    • RE: Way off Audio Topic: Motorcycles - mkane77g 06:12:48 02/22/17 (8)
      • RE: Way off Audio Topic: Motorcycles - mkane77g 06:15:53 02/22/17 (7)
        • RE: Way off Audio Topic: Motorcycles - mkane77g 06:18:09 02/22/17 (6)
          • RE: Way off Audio Topic: Motorcycles - mkane77g 06:20:07 02/22/17 (5)
            • RE: Way off Audio Topic: Motorcycles - mkane77g 06:23:02 02/22/17 (4)
              • RE: Way off Audio Topic: Motorcycles - mqracing 09:04:16 02/22/17 (3)
                • RE: Way off Audio Topic: Motorcycles - mkane77g 16:52:41 02/22/17 (2)
                  • RE: Way off Audio Topic: Motorcycles - mkane77g 17:28:24 02/22/17 (1)
                    • RE: Way off Audio Topic: Motorcycles - mkane77g 06:15:40 05/01/17 (0)
• MagneQuest Iron - mkane77g 14:20:46 02/19/17 (1)
  • RE: MagneQuest Iron - mqracing 18:54:37 02/21/17 (0)
• Transformer wiring - OldNuke 22:48:42 02/16/17 (8)
  • TFA-2004 Mexico hookup - mqracing 09:36:06 02/17/17 (7)
    • RE: TFA-2004 Mexico hookup - OldNuke 11:20:13 02/17/17 (5)
      • RE: TFA-2004 Mexico hookup - OldNuke 13:33:00 02/19/17 (4)
        • RE: TFA-2004 Mexico hookup - mkane77g 14:23:40 02/19/17 (3)
          • RE: TFA-2004 Mexico hookup - OldNuke 16:37:15 02/19/17 (2)
            • RE: TFA-2004 Mexico hookup - OldNuke 22:44:44 02/20/17 (1)
              • RE: TFA-2004 Mexico hookup - OldNuke 18:31:44 02/22/17 (0)
    • RE: TFA-2004 Mexico hookup - EricSan 10:47:59 02/17/17 (0)
• Last Call on TL-404 autoformer - mqracing 19:37:31 02/03/17 (2)
  • Some additional specs on the TL-404 autoformer - mqracing 13:47:36 02/04/17 (1)
    • RE: Some additional specs on the TL-404 autoformer - OldNuke 22:25:49 05/05/17 (0)
• S-240-A Grounding - Ardee 10:24:18 01/20/17 (4)
  • RE: S-240-A Grounding - Ardee 02:59:55 01/25/17 (2)
    • RE: S-240-A Grounding - mqracing 13:10:59 01/25/17 (1)
      • RE: S-240-A Grounding - Ardee 03:21:28 01/26/17 (0)
  • BOTH - mqracing 13:23:40 01/20/17 (0)
• MQ will be closed from 12/24/16 through 1/2/17 - mqracing 11:14:28 12/19/16 (1)
  • Happy solstice to everyone! - Paul Joppa 19:37:33 12/22/16 (0)
• Plate chokes for 10k Rp type tube - shane. 22:31:36 12/05/16 (3)
  • RE: Plate chokes for 10k Rp type tube - mqracing 19:35:54 12/06/16 (2)
    • RE: Plate chokes for 10k Rp type tube - shane. 22:18:30 12/06/16 (1)
      • RE: Plate chokes for 10k Rp type tube - Caucasian Blackplate 07:16:26 03/11/17 (0)
• Autoformers - OldNuke 19:05:55 11/30/16 (5)
  • RE: Autoformers - mqracing 13:17:35 12/02/16 (4)
    • RE: Autoformer link - mqracing 13:18:29 12/02/16 (3)
      • RE: Autoformer link - OldNuke 22:05:19 12/02/16 (2)
        • RE: Autoformer link - mqracing 19:16:08 12/06/16 (1)
          • RE: Autoformer link - OldNuke 23:30:11 12/12/16 (0)
• More goodies from S8 Audio Labs - mqracing 20:02:53 11/17/16 (1)
  • RE: More goodies from S8 Audio Labs - sidewayseightaudiolabs 21:57:11 12/01/16 (0)
• GM70 Opt - deafbykhorns 16:31:42 10/27/16 (4)
  • FS-100 PF - gluca 14:02:13 11/07/16 (2)
    • What does "PF" stand for? - Triode_Kingdom 15:57:20 11/28/16 (1)
      • Para Feed....nt - Bas Horneman 23:37:13 11/28/16 (0)
  • RE: GM70 Opt - mqracing 16:16:44 11/01/16 (0)
• Choke for Class A2 211 Grid? - Triode_Kingdom 13:28:49 10/09/16 (3)
  • Another thought on this... - Triode_Kingdom 14:05:56 10/15/16 (2)
    • RE: Another thought on this... - mqracing 15:43:40 10/16/16 (1)
      • RE: Another thought on this... - Triode_Kingdom 13:12:48 10/17/16 (0)
• R-162.5 hookup - mqracing 08:49:54 09/13/16 (0)
• help with Grid Choke selection - awsjr 04:19:09 09/07/16 (5)
  • RE: help with Grid Choke selection - Paul Joppa 01:15:16 09/18/16 (2)
    • RE: help with Grid Choke selection - mqracing 16:32:21 09/18/16 (1)
      • RE: help with Grid Choke selection - Paul Joppa 04:43:56 09/19/16 (0)
  • RE: help with Grid Choke selection - mqracing 20:23:51 09/10/16 (1)
    • RE: help with Grid Choke selection - awsjr 02:42:59 09/12/16 (0)
• EI-625 Lam Outputs - OldNuke 19:17:38 08/24/16 (11)
  • RE: EI-625 Lam Outputs - mqracing 11:40:07 08/25/16 (10)
    • RE: EI-625 Lam Outputs - OldNuke 12:14:53 08/25/16 (9)
      • RE: EI-625 Lam Outputs - OldNuke 20:21:26 08/25/16 (8)
        • RE: EI-625 Lam Outputs - mqracing 17:58:12 08/26/16 (7)
          • RE: EI-625 Lam Outputs - OldNuke 20:46:19 08/26/16 (4)
            • RE: EI-625 Lam Outputs - Paul Joppa 18:40:38 08/30/16 (3)
              • RE: EI-625 Lam Outputs - OldNuke 19:50:45 08/30/16 (2)
                • RE: EI-625 Lam Outputs - Paul Joppa 12:23:15 09/02/16 (1)
                  • RE: EI-625 Lam Outputs - OldNuke 23:11:35 09/02/16 (0)
          • RE: EI-625 Lam Outputs - mqracing 18:00:44 08/26/16 (1)
            • RE: EI-625 Lam Outputs - OldNuke 20:50:56 08/26/16 (0)

Threads started on or before 9/30/06 are archived Here.
Threads started on or before 6/30/06 are archived Here.
Threads started on or before 3/31/06 are archived Here.
Threads started on or before 12/31/05 are archived Here.
Threads started on or before 9/30/05 are archived Here.