In Reply to: RE: Time to move on posted by 4everyoung on July 19, 2016 at 15:15:28:
thingies that have been posted about in the past six months, or so.
They seem to be quite similar to those sold by Mapleshade, and from what I've read they cost less than a buck each.
If the weight ratings jive (they have various versions) with your "quite" heavy amps I'd start with two near the corners of the board supporting the transformer(s) side of the amp and then a single one placed center/edge wise on the lighter side of the amp.
Just place your amps on the boards using their original footers (the ones that I assume the amps were voiced with) and give it a go.
Not a cone fan, though I do use a single Mapleshade brass cone as a record weight on my Thorens deck (it's affixed upside down to a Thorens 45/single adaptor) and it sounds super in this application.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- If you have not liked cones try the inexpensive/compliant Isoblock... - DeKay 18:11:18 07/19/16 (5)
- RE: If you have not liked cones try the inexpensive/compliant Isoblock... - 4everyoung 11:16:40 07/20/16 (4)
- Here's a link to some... - DeKay 16:42:51 07/20/16 (3)
- RE: Here's a link to some... - 4everyoung 13:32:16 07/22/16 (2)
- Good cheap fun, but as a warning... - DeKay 19:30:21 07/24/16 (1)
- Brass footers, not brass cones - 4everyoung 13:46:54 07/25/16 (0)