In Reply to: Re: Crossover document - final draft posted by Wayne Parham on February 18, 2002 at 09:42:47:
I just figured if you took the time to write a 80+ page document you would have at least measured the system to see how it really works.The other point was how does this paper actually relate to your products where there is a 5 or 6 foot difference of driver alignment at 800-1600 cycles? I guessed you where using some type of delay for the high pass seeing the cabinets themselves do not address this for hifi use.
Also, I have had very poor sound resulting from using a folded horn crossed over this high even with aligned drivers. That is why I figured you have some real response measurements that show the linear response you are seeking.
Mike Bates
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Crossover document - final draft - Mike Bates 11:55:50 02/18/02 (5)
- Re: Crossover document - final draft - Wayne Parham 12:47:50 02/18/02 (4)
- As Tim Robbins said in “Hudsucker Proxyâ€: “You know… for kids...†</nt> - Romy 13:12:55 02/18/02 (3)
- Fallen Comrade - Felix the Cat 15:50:19 03/11/02 (0)
- as Williams said in "DUELING IN THE OLD SOUTH" - Sam P. 15:36:02 02/18/02 (0)
- Romy, this says it better than I could - mikebake 14:11:44 02/18/02 (0)