In Reply to: Valencia undoing advice posted by Idler on June 18, 2017 at 15:39:21:
I just dis-assembled a pair of Altec Magnificents to repurpose for my 604s. What I found very effective to is get a steel handled putty knife, put a bit of a sharp edge on it, and carefully drive it down between the baffle and the support piece (blade face flat to the face of the baffle). The glue on mine was remarkable strong, but if you are careful, and move methodically along from one end to the other (slowly), you can probably remove it fairly well.
regards -- Roger
This post is made possible by the generous support of people like you and our sponsors:
Topic - Valencia undoing advice - Idler 15:39:21 06/18/17 (5)Follow Ups
- RE: Valencia undoing advice - rogerh113 06:59:26 06/19/17 (0)