Apologies in advance for what might be a ridiculously tedious question...
JBL product literature (link below) gives the throat diameter of the 2441 as:
The fact is, however, that 49mm is significantly shy of 2" (by 1-59/64" ... so more than 1/16" but less than 1/8").
My question: is the 2441 compatible, throat-wise, with a horn that was set up for the TAD TD-4001, with its 49.2mm / 1-15/16" throat diameter? Basically, if the 2441's 49mm spec is to be believed, then it's a tiny bit narrow; and if its 2" spec is to be believed, then it's a tiny bit wide. Maybe someone here who knows the 2441 can shed some light?
Again, my apologies ... I know this is tedious. But, depending on tolerances, this may mean the difference between compatibility and incompatibility.
This post is made possible by the generous support of people like you and our sponsors:
Topic - JBL 2441Throat Diameter - Jim Hodgson 15:33:09 02/25/17 (8)
- RE: JBL 2441Throat Diameter - tomservo 13:57:24 03/01/17 (2)
- RE: JBL 2441Throat Diameter - Rod M 12:57:33 02/26/17 (0)
- RE: JBL 2441Throat Diameter - EduardG 18:45:22 02/25/17 (3)