In Reply to: RE: Electro-Voice Regal lll posted by Paul Eizik on January 15, 2017 at 15:04:06:
I made a mistake and put uF instead of ohms. Made a correction to the original post. Shorting the test leads of the DMM gave me a reading of 0.2 about a second later it read 0.1 and then a second later it read 0.0 I did clean the contacts with sand paper to get a good contact. The washers were painted over. I scraped the paint and there is a red and black washer. In my diagram the red is on the left side of both horns. So mid horn has green wire to red contact and black wire to black contact. Tweeter has yellow wire to red contact and black wires to black contact.
I am confused to say the least. EV literature says the T35, T35B & T350 tweeters are 16 ohms.
http://www.cieri.net/Documenti/Istruzioni/Electrovoice%20-%20Tweeter%20T35,%20T35B,%20T350.pdf
But replacement diaphragms are 8 ohms.
http://www.simplyspeakers.com/ev-replacement-speaker-diaphragm-89486a.html
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Electro-Voice Regal lll - CraigI 14:42:12 01/16/17 (14)
- RE: Electro-Voice Regal lll - Paul Eizik 20:45:52 01/16/17 (11)
- RE: Electro-Voice Regal lll - Paul Eizik 09:23:24 01/17/17 (10)
- RE: Electro-Voice Regal lll - CraigI 17:09:43 01/19/17 (9)
- RE: Electro-Voice Regal lll - Paul Eizik 10:17:31 01/20/17 (8)
- RE: Electro-Voice Regal lll - CraigI 11:59:38 01/20/17 (7)
- RE: Electro-Voice Regal lll - CraigI 11:48:24 01/22/17 (6)
- RE: Electro-Voice Regal lll - Paul Eizik 07:28:02 01/23/17 (5)
- RE: Electro-Voice Regal lll - CraigI 15:47:52 01/23/17 (4)
- RE: Electro-Voice Regal lll - Paul Eizik 08:14:20 01/24/17 (3)
- RE: Electro-Voice Regal lll - CraigI 08:21:36 01/26/17 (2)
- RE: Electro-Voice Regal lll - CraigI 16:09:48 01/26/17 (1)
- RE: Electro-Voice Regal lll - Paul Eizik 19:06:23 01/26/17 (0)
- RE: Electro-Voice Regal lll - CraigI 14:53:47 01/16/17 (1)
- RE: Electro-Voice Regal lll - DaveV 16:33:55 01/16/17 (0)