Hey all,
This is a surplus single horn I built. Pretty good with 2" driver but I didn't find the gooditude to be worth the biggitude: there were some things it could do just right, but I found the big coaxials (in normal rectangular boxes) that I'm using now to be an easier fit to my room.
It's yours if you can collect it.
Specs: 60cm mouth, 13kg. Le'Cleach curve tacked onto a conical mouth. Initial angle is 23degrees for the B&C drivers I had, and I thought that a pure Le'Cleach mould have been a bit short, so I defiled its mathematical purity. Visually, the patina is intentional - I put on layers of paint, and then sanded it back to expose them, and the ply ribs. But I won't be offended if you repaint :)
This post is made possible by the generous support of people like you and our sponsors:
Topic - small giveaway, Melbourne Australia - hollowboy 04:24:07 11/19/12 (3)
- RE: small giveaway, Melbourne Australia - amnesiac 07:08:09 11/19/12 (2)
- RE: small giveaway, Melbourne Australia - hollowboy 02:45:07 11/20/12 (1)
- RE: small giveaway, Melbourne Australia - amnesiac 19:54:36 11/20/12 (0)