In Reply to: Electro Voice 12TRX's need a new cabinet posted by Brandt Wilson on June 16, 2012 at 11:13:27:
Brandt
EV recommended a 5.85 cu. ft. box for the 12TRXC, with a 30.4 sq. in. vent area and a 3.4 in. vent length, which should get you a 3 dB down point @ 43 Hz. The Aristocrat cab is another alternative, but it really needs a corner placement to complete loading of the rear firing horn mouth. There are various online calculators where you can design your own box, but check them with each other and the EV optimal cab above. Terry G. (who sometimes posts here) has a website (see link) with a lot of 12TRX info, however it was'nt responding when I just checked it, but it may be back up later. Add an 1823M compression driver with an 8HD horn, and you'll have a classic EV rig. Hi-E regular Freddyi is Kaptain of the Karlson Krew and he may have some K advice for the 12TRX.
Good luck.
Paul
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Electro Voice 12TRX's need a new cabinet - Paul Eizik 08:27:20 06/17/12 (3)
- RE: Ping Kapt. Freddyi and Terry Gesualdo.... - Paul Eizik 19:45:33 06/18/12 (2)
- RE: Ping Kapt. Freddyi and Terry Gesualdo.... - GM 21:53:29 06/18/12 (1)
- RE: Thanks GM.... - Paul Eizik 19:54:53 06/19/12 (0)