In Reply to: RE: ................. posted by Norman Bates on May 11, 2012 at 04:08:26:
Thanks Norman that picture is very clear to see exactly what you have done. I have played with some 30 ppi foam in the throat section you might try a thin slice of that to break up the modes and get away with less HF boost. I had a block of 30 ppi foam in the whole are that you have you foam in (parallel section at throat) I replaced that with some 30 ppi in the conical throat section of the horn I also have some in the comp driver. thank you and I will be interested to find out more about the horn kit you mentioned.
You might want to try aligning the top plate of your comp driver with the top plate of your woofer. I have found that in my room 8' high I prefer the horn to have its narrowest dispersion in the horizontal plane. Give that a try and see what you think. Best regards Moray James.
moray james
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: ................. - moray james 11:08:45 05/11/12 (1)
- I'll get back - Norman Bates 18:27:01 05/11/12 (0)