|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
|
|
|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
|
In Reply to: Re: Altec 604 - opinions sought from 604 owners posted by blakey on April 2, 2007 at 09:24:14:
I have to explain about the Markwart crossover. This crossover doesn't have a HF-control. It has a MF-equalizer keeping high frequencies almost constant. If you refer to the schematic (http://home.earthlink.net/~jmarkwart/sitebuildercontent/sitebuilderfiles/604-8h_gsmpl.pdf) I replaced the combination of R4 + P1 with a switch selecting a resistor instead. I am using a switch with 10 positions: 2.2, 2.7, 3.3, 3.9, 4.7, 6.8, 10, 15, 27 and 56 ohms. Measuring the frequency response in my listening room I settled on 6.8 ohms.
High frequencies are only attenuated slighly by resistor R3 which is 2.7 ohms in my implementation. I have to check my measurement protocols how much mid-band attenuation is achieved with this setup.
Hope this helps
Norbert
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Altec 604 - opinions sought from 604 owners - Norbert2nd 08:18:13 04/03/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
