In Reply to: Re: Vas measurement.....NT posted by M on March 17, 2007 at 09:45:56:
I did not calculate it from the mass...the CLIO system does a sweep,
you add a known mass to the cone run the sweep again and it spits out
the T/S parameters.You can also run the second sweep with the driver mounted in a box of known volume and it will give you the T/S numbers
based on that.Later
Rich
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Vas measurement.....NT - Rich Jura 13:57:01 03/17/07 (1)
- Re: Vas measurement.....NT - M 01:23:52 03/19/07 (0)