|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
|
|
|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
|
In Reply to: In my case posted by Russ57 on March 7, 2007 at 14:56:42:
Hi Russ,Are you thinking about (1) using the preamp to adjust the volume, in combination with a pad-down after the crossover, or (2) leaving the preamp at a fixed setting (e.g., with a gain of 3.5 for CD) and using another volume control after the crossover? I think the former is likely to have a worse signal-noise ratio than the latter at a normal listening level.
Nevertheless, since a pad-down (a voltage divider or a pot) is fairly easy to make and insert between the crossover and the amp, perhaps you can give the first approach a try and let us know whether you hear an improvement over no pad-down.
Do you have any noise issue now with the active crossover?
Kurt
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: In my case - KCHANG 16:40:29 03/07/07 (2)
- Thanks, mostly looking for..... - Russ57 11:53:58 03/08/07 (1)
- Don't worry about it. - KCHANG 13:53:48 03/08/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
