In Reply to: Re: try this posted by kurt s on February 24, 2007 at 20:37:25:
As far as alternative systems go, if you like the Lowther's directness, you might try something like a 10" driver designed for horn loading. B&C makes one available at Parts Express. You can bang together a "flower petal" type conical horn without too much strain, or even a basic rectangular conical horn. These go to 100hz on the low side and then add something like a bullet tweeter for the 4K+ range. I'm guessing something like this would retain many of the attractions of the full-range approach (crossovers below 200hz and above 3000hz), but give tremendous dynamic range. Plus, you could do it all for $600 or so.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: try this - nl 08:54:30 02/25/07 (0)