Home Hi-Rez Highway

New high resolution SACD releases, players and technology.

Pre-echo

What you're hearing is likely "pre-echo." That can occur as a mastering defect if the cutting pitch wasn't expanded enough. Normally, at the beginning of each track the pitch is supposed to be overly coarse (lots of land between the grooves) to minimize pre-echo. Pre-echo can also occur as a pressing defect, particularily if the vinyl press is set up with too much pressing pressure on the "biscuit" of vinyl.

You could also be experiencing "print-through" from the original analog tape if that was the source for the recording in question. You'll hear print-through a lot on older analog tapes with no noise reduction or that were recorded too "hot" to tape. Frequently, just being stored for a long time - and perhaps with too tight of a tape wind - the print-through occurs.


Best Regards,

Michael Bishop
Recording Engineer


This post is made possible by the generous support of people like you and our sponsors:
  Crux Audio  


Follow Ups Full Thread
Follow Ups
  • Pre-echo - Michael Bishop 14:05:16 01/25/07 (1)
    • Thanks - Ted Smith 14:13:25 01/25/07 (0)


You can not post to an archived thread.