In Reply to: Same request as above: Pic of MACE2 posted by LineArrayNut on December 23, 2004 at 12:09:18:
I got mine today and put them both in after 4 hours of tedious work and presto- nothing.Cd drawer comes out and does nothing.The laser jumps around.Power light doesn't come on.Still dead in the water.I used a solder station with hot air to install.There are 2 copper L-shaped clips I can't remember where to put them.Could be a grounding problem.I took off the front cover and I believe this if where they came from.I doubled check all connections on the chips for continuity to each solder joint under a magnifier.I could really use some help to see if it's worth salvaging.Is there a reset/reboot that I need to do?Mike
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Same request as above: Pic of MACE2 - audioeyedoc 23:06:13 12/24/04 (1)
- copper tabs - bevo 06:08:11 01/02/05 (0)