64.180.235.198
This Post Has Been Edited by the Author
TU-H82 HYBRID TUBE AMPLIFIER KIT "CUBIC Kit"
Compact and stylish - 88mm cube vacuum tube hybrid amplifier kitThe clear sound of solid state and the soothing warm sound of a tube amp- this compact cube amplifier blends the best of solid state and tube amplification. Deck your desk with this sophisticated amp and its wonderful sound.
【 Features 】
● Hybrid of vacuum tube input buffer + class D speaker amp (Built-in class AB headphone amp)
● DC-controlled electronic volume
Therefore the volume deflection between right and left channels at small sound volume is minimized.
● Headphone output
● Built-in USB-DAC for PC connection
● Interlocking the amp power ON/OFF with the PC USB power selectable
● Assembly kit for users to experience the fun of DIY
(A PCB is preassembled, no soldering is required. For assembly, users will need a long-nose pliers
and a screwdriver only. (A hex wrench is included.))
【 Specifications 】
●Stock tube 12AU7 (ECC82) x 1
●Input terminal [INPUT-1] 3.5mm stereo mini jack (Front panel side)
[INPUT-2] RCA jack (Rear panel side) * INPUT-1 and INPUT-2 are mixed.
[USB-DAC] USB mini-B connector (Rear panel side)
* USB input is cut when INPUT-1 is connected.
●Output terminal [SPEAKERS] Gold plated binding terminal (Banana plug usable)
[PHONES] 3.5mm stereo (3-pole) mini jack
●Rated output [Speaker output] 6Ω load 8.2W+8.2W
8Ω load 6.5W+6.5W
[Headphone output] 16Ω load 8mW+8mW
●Rated input [INPUT-1] 170mV [INPUT-2] 470mV
●Frequency response 20Hz-25kHz (-3dB, 6Ω load)
●Residual noise 120μV (IEC, 6Ω load)
●USB-DAC 32kHz/44.1kHz/48kHz ( 16bit) / WindowsXP or later, Mac OS X or later
●Power voltage [Amp] DC 12V [AC adapter] AC100-240V
●Current consumption [No signal] 0.2A [Rated output] 2A
●Dimensions W88 x H90 x D117 mm (including projections) W88 x H88 x D88 mm(Chassis only)
●Weight [Amp] Approx.790g [AC adapter] Approx.300g (including AC cord)
Edits: 08/31/14 08/31/14 09/12/14 09/12/14 09/30/14Follow Ups: