Hey Joe,
I finally was able to finish the modifications you sent me which were the CAE-MP3 and the CAE-1A modules. When I performed the tests on the CAE-M3P board at the "BD" to Chassis test with the Bias Pot turned counterclockwise I got -63.5 VDC; turned clockwise I got -30.65 VDC. When I checked the "5" to "5" I got 5.5 VAC on the inside pad on the outside pad I got .24 VAC.
I checked the values on both boards and found that R19 on the CAE-MP4 is 4k
when the parts list says it should be 1k/1w. Would this account for the readings I am getting. I checked all the components and found that this is the only issue.
I have not gone any further in the testing, should I?
Thanks
Richard
This post is made possible by the generous support of people like you and our sponsors:
Topic - Help on test results - rockpassion 17:42:28 03/06/14 (4)
- RE: Help on test results - Joe Curcio 08:07:58 03/24/14 (1)
- RE: Help on test results - rockpassion 18:16:56 03/26/14 (0)
- RE: Help on test results - xaudiomanx 17:30:18 03/07/14 (1)
- RE: Help on test results - rockpassion 18:23:22 03/07/14 (0)