In Reply to: Flare on baffle posted by polardoc on November 21, 2007 at 21:09:37:
You can use a 45 degree chamfer bit or a 3/4" round over bit. Assuming your baffle is 1" or so (25mm) either of these will work. The instructions should show that the first 10mm closest to the driver should remain untouched and square.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Flare on baffle - driguy 17:33:37 11/23/07 (0)