In Reply to: Re: clearer now.... posted by Clive on June 24, 2006 at 01:36:48:
Things are broken in at this point. I recently tried feeding signal to the subs off the amp terminals instead of the preamp, based on the 6Moons thread, to see if it would fill the midrange dip any. When I set the analyzer up and ran the new response up against my stored scan for the previous setup taken several months ago, they tracked exactly.Robert has suggested the midrange dip is from sidewall reflections cancelling out wavelenghts from the wideband unit. I measure the same roll-off no matter where I put the wideband unit in the room, and regardless of whether I'm using one or two widebands in the test.
I'll try the tweeter caps when my schedule allows.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- break-in and placement - JBasham 07:50:17 06/26/06 (1)
- Re: break-in and placement - Robert Bastani 09:55:18 06/26/06 (0)