In Reply to: RE: Static volume pot on Audio Note preamp posted by Rolandas on November 1, 2012 at 01:13:15:
Hi Rolandas
It should be ok as long as it's not too loud, so 5% of the music level or so. If it is louder, the tube may be on the way out, or a more serious problem could be the cause. But from your description I would say the Caps are going letting DC through, or a dry solder joint (can be worse after warm up as it expands), or tube pins are dirty, or just an old tube. I would be surprised if it was anything else.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Static volume pot on Audio Note preamp - astrostar59 15:57:54 11/01/12 (0)