|
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
|
|
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: RE: Did you check the fuses? posted by El Monte on August 5, 2022 at 16:22:09:
Excellent! You might want to check the tube bias with a meter and see if the settings hold steady. Not sure how old your tubes are but might be worth keeping an eye on them.
It's possible that something out of spec caused the fuse to blow in the first place, but not necessarily. Sometimes they just blow if they are spec'd real close to the current draw or there was an unexpected current spike.
Anyway, glad you got it working again. Keep an eye on it for a while.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Did you check the fuses? - AbeCollins 18:27:12 08/05/22 (1)
- RE: Did you check the fuses? - El Monte 17:42:23 08/06/22 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]